Electronics Forum | Sat Aug 13 23:41:31 EDT 2016 | sarason
Download PCBSynergy which is located here. http://members.iinet.net.au/~sarason/ It has outputs for the KE750,KE760 and 2080 from Juki It will read a large number of CAD formats. Including Altium PCBDOC, and Protel PCB and all the variants inbetwe
Electronics Forum | Fri Nov 05 18:47:31 EDT 2010 | eadthem
I'm guessing when you say bare board you mean wet paste only? When you say the pads move slightly are your boards warped at all at the Vscore? What we do is use per modual fids. first you delete or don't make panel fids and then theres a option wh
Electronics Forum | Sun Sep 21 03:13:31 EDT 2008 | slthomas
Assembleon also has another much less sophisticated programming utility (Cad2Cad) that at one time was a free of charge downloadable thing. I got it from the broker I bought our used machine from. I get that you are new with this equipment, but is t
Electronics Forum | Thu Nov 19 11:15:13 EST 1998 | Stefan Witte
Hi Martin, I found the Amistar very easy to program and operate, but I recommend using a PC link ( PROCOMM )for data up and download. Despite the age of the machine, Amistar was extremly helpful in telephone support. We purchased some additional man
Electronics Forum | Tue Sep 20 02:39:43 EDT 2005 | Lasse H.
Hallo again Base... Thanks for your answer... I've been following up, but with no luck... I've been on http://www.assembleon.com and been trying the Cad2Cad Express but I haven't got any luck in converting the dxf, or dwg files to some useable txt f
Electronics Forum | Wed Oct 05 06:10:41 EDT 2005 | lscontrol
Thanks for the help so far. But i still have problems, do to the downloaded version of Cad2Cad ver. 3 which does not have any save as/export/import or open file-posibilities which support vios, csv or txt-files or anything like it. I downloaded the
Electronics Forum | Thu Oct 06 14:33:46 EDT 2005 | Cmiller
The software you downloaded is not what you need. I can e-mail you a version of Philips cad to cad converter V1.5. We use it for Comet and Topaz machines. Send me an e-mail and I will forward it to you. cmiller@adltech.com
Electronics Forum | Sun Mar 05 12:53:08 EST 2023 | dontfeedphils
I actually still have all my docs and software from that time. Just dug through some manuals and found one for "IS - Intelli PD" (program download). Couldn't tell you if this is still what it's called, but this is what we used to send pro
Electronics Forum | Thu Mar 22 10:11:47 EDT 2012 | menatech
if you download the mint program (maintance key switched and download via auto mode. Does is read the card correct and does it identifies the correct motor encoder?
Electronics Forum | Mon Jan 06 14:02:00 EST 2020 | dman97
Have you tried to open the MINT program and re download the drivers to the cards? Sometimes the cards fail because the battery does not hold sufficient charge to keep the files intact.
