Electronics Forum | Sat Aug 13 23:41:31 EDT 2016 | sarason
Download PCBSynergy which is located here. http://members.iinet.net.au/~sarason/ It has outputs for the KE750,KE760 and 2080 from Juki It will read a large number of CAD formats. Including Altium PCBDOC, and Protel PCB and all the variants inbetwe
Electronics Forum | Wed Aug 03 13:06:51 EDT 2022 | proceng1
I am a little lost on some of that, but here is what we do. The camera view has the package outline, including an orientation indicator. The operator has the camera step through the program, and checks that the outline and indicator are correct on
Electronics Forum | Wed Aug 03 07:29:03 EDT 2022 | pradeep14
Hi, We are facing the issue with Component orientation(Wrong orientation), during Proto build/NPI time in SMT for 1st board placement. We are not doing 1st board with STICKY board, directly placing the components with Paste board only. Pls suggest, H
Electronics Forum | Thu Aug 04 16:08:11 EDT 2022 | unisoft
>>>> The Unisoft ProntoPLACE software ( https://www.unisoft-cim.com/pcbplace.php ) creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines, and includes the basic feat
Electronics Forum | Tue Sep 28 08:07:48 EDT 1999 | Doug
Does anyone know of a web site (or other source) that illustrates the orientation of polarized SMT packages with respect to the carrier tape sprocket holes? THANKS, Doug
Electronics Forum | Wed Sep 29 22:41:54 EDT 1999 | Dave F
| Does anyone know of a web site (or other source) that illustrates the orientation of polarized SMT packages with respect to the carrier tape sprocket holes? | | THANKS, | | Doug | Doug: I believe EIA-481 is the spec. you're looking for. You ca
Electronics Forum | Fri Jan 16 07:48:29 EST 2004 | Mika
We usually program the components in the component database with pin 1 in the lower left corner. Then in the feeder database we set the component orientaion to 270 deg for Tray feeders(turn the tray in the feeder 180 deg) and "tube" feeders. For tape
Electronics Forum | Thu Jan 13 10:30:40 EST 2011 | bdamico
Hello Scott, Simply program the side angle cameras as you would for any other device using the downward camera. For instance, solder joint inspection for a PLCC would utilize a basis window, bridge inspection algorithm and individual solder joint i
Electronics Forum | Tue Sep 20 14:13:43 EDT 2005 | Rich
I use Cad2Cad v1.5 with Phillips Topaz. I don't know how much is differs, try this: Converting data to a Philips VIOS Text File format: 1. Open the pick and place data in Excel and format it to look like table 1. ** Make sure you delete the �mm�
Electronics Forum | Fri Jan 18 20:50:21 EST 2013 | sarason
The math is a function of how the component is orientated on the reel/tape. Verse how it is oriented on the board. Different SMT machines use CCW or CW orientation. Different CAD packages use CCW or CW. The next question is which Cad package are you
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
