Electronics Forum | Wed Nov 15 14:33:57 EST 2017 | nc_dan
We acquired a used ViTrox V510 AOI machine, our first AOI machine. The programming interface is quite a bit different from our Pick and Place machines so our current tech is not familiar with it. We read the programming manual and made some progress
Electronics Forum | Wed May 15 05:31:26 EDT 2013 | mhkhan_hal
Pick & Place machine,Europlacer Progress-6 is under breakdown. The machine is not showing any error message on the screen. We found that vacuum is getting generated in the machine, but it is not available at Nozzle holder. Kindly advise how to resol
Electronics Forum | Fri Apr 25 09:17:47 EDT 2003 | Adam
We will soon be taking our first steps to place 0402's using a Europlacer Progress 6 pick & place machine.Even though the machine is rated at placing these chips, I was wondering if anyone has any practical experience and are prepared to share their
Electronics Forum | Wed Oct 24 16:54:54 EDT 2007 | dekhead
It's an Horizon (01) with large board (24" x 30")capability. Some software issues, as the OEM stopped progressing software on this machine (an offshoot of Horizon 7SP02) and never made final release Typhoon software compatible with this (Same with Vi
Electronics Forum | Fri Jan 27 16:42:29 EST 2023 | dilogic
We have odd problem with zeroing of UIC Advantis (4982B). It performs axis zeroing without complaining (all axes enabled at the end), but after final move of the head to the center of the machine, it hangs without any error message. Status isshowing
Electronics Forum | Sat Oct 08 19:06:32 EDT 2005 | Mika
Check the timing belt. I have running into a similar situation before. "1 notch of" of the timing belt can cause very strange behaviour of the machine. /Sincerly Ps. let us know your progress. Ds.
Electronics Forum | Wed Jan 06 02:12:02 EST 2010 | tpappano
Congrats on your acquisition! Looking forward to hearing how the setup and operation progresses. You might want to place some large baskets near the machine to catch all the money that will start flying out of it.
Electronics Forum | Wed Dec 02 15:36:58 EST 1998 | Alden Lewis
| We are in the process of assessing some medium volume, stand alone SMT Placement systems. Does anyone have any experience with :- | | 1) Europlacer (Specifically the Progress 6 or EP600) | 2) Intelliplace (DHM-120 or SHM-120) | | I have searched
Electronics Forum | Thu Dec 03 07:49:30 EST 1998 | Steve Sauer
Hi Scott, The only information that I have on the Intelliplace machine is that it is their own design unlike the other models (Casio) that they are licensed to sell. As for the other machine (Europlacer Progress 6), I have an extensive background wit
Electronics Forum | Wed Jan 21 09:33:41 EST 2009 | pigsinspace
Ok. As you know the machines changed a bit after 95 due to CE regulations. There are no drawing on board/box level in Panasert machines. However normaly i`ts the 100 volts thats "shorting out" the machine and shuts it down. Check all cooling fans a