Electronics Forum | Tue Aug 24 19:32:16 EDT 2021 | jdengler
I would start there. Swap MP boards between the 2 machines to see if the problem follows. If that doesn't change anything then try the SCSI board, you can continue until the problem moves to id the bad board.
Electronics Forum | Wed Aug 25 21:41:12 EDT 2021 | same problem
I'm having same problem with one of my CP-642s. We checked cards and now the monitors are not turning on.
Electronics Forum | Mon Aug 23 16:28:14 EDT 2021 | rodrigo
Hi all, One of our Fuji IP3 (we have two) keeps losing the proper data (proper, status, programs) when off for a couple of days or so. I changed the battery on the MP board (its voltage looked fine: 3.6v) but that didn't fixed it. I notice a super ca
Electronics Forum | Wed Jul 06 09:36:22 EDT 2005 | dougs
aj, what do you do if your customers engineers cant be bothered sorting out the CAD data, or if you tell them you need it in a certain format and it just keeps coming in the same way anyway, we can't rely on our customers ( or some of them in partic
Electronics Forum | Mon Oct 19 11:56:48 EDT 1998 | Jim Mitchell
Quad has opened event number #037508 in case you can not resolved the issue over the phone on the 24 hour toll free line. Field service is ready and waiting. In most cases this error can be resolved by entering the proper data in the component edit
Electronics Forum | Sun Sep 12 10:08:55 EDT 1999 | Earl Moon
| hello | | having a problem with one customers bare boards not matching my stencil apertures. i design stencils based on gerber data and reduce up to 15% on some pads. do some board houses reduce pads after receiving gerber data???why would they d
Electronics Forum | Mon Sep 13 04:11:27 EDT 1999 | Earl Moon
| | hello | | | | having a problem with one customers bare boards not matching my stencil apertures. i design stencils based on gerber data and reduce up to 15% on some pads. do some board houses reduce pads after receiving gerber data???why would
Electronics Forum | Tue Jun 20 19:12:41 EDT 2023 | madisreivik
Hello all ! FUJI IP3 starts up, makes zero setting OK But if I start AUTO mode, it gives error -------------------------------------------------------------------------------- Code 11082010 UsedBy MTU3,MTU4,MTU5 Display Usable Proper Data has
Electronics Forum | Tue Jun 20 21:42:19 EDT 2023 | jdengler
The MTU has it's own proper data file. You need to send that to the MTU.
Electronics Forum | Fri Jun 23 21:10:29 EDT 2023 | meher
To resolve this issue, you need to ensure that the proper data is stored and transmitted to the MTU. Double-check the communication settings between the machine and the MTU during the startup process. Make sure that all the necessary data is being se
.gif)
