Electronics Forum | Tue Jun 20 19:12:41 EDT 2023 | madisreivik
Hello all ! FUJI IP3 starts up, makes zero setting OK But if I start AUTO mode, it gives error -------------------------------------------------------------------------------- Code 11082010 UsedBy MTU3,MTU4,MTU5 Display Usable Proper Data has
Electronics Forum | Tue Jun 20 21:42:19 EDT 2023 | jdengler
The MTU has it's own proper data file. You need to send that to the MTU.
Electronics Forum | Wed Jun 21 06:10:36 EDT 2023 | madisreivik
Thanks ! I totally forgot that MTU had its own prop file, uploaded it from Flexa and now works fine.
Electronics Forum | Sat Jun 24 13:08:09 EDT 2023 | madisreivik
All is OK now. The machine was offline couple months and probably some memory battery is dead. All problems were solved after uploading prop data to IP and MTU.
Electronics Forum | Fri Jun 23 21:10:29 EDT 2023 | meher
To resolve this issue, you need to ensure that the proper data is stored and transmitted to the MTU. Double-check the communication settings between the machine and the MTU during the startup process. Make sure that all the necessary data is being se
Electronics Forum | Sun Oct 31 11:01:06 EDT 2010 | cobar
Alloy properties http://www.shanelo.co.za/Alloy%20Properties.htm
Electronics Forum | Wed Jan 30 09:41:36 EST 2013 | eniac
I think, the target is one - restore the properties of solder paste. Fluxing properties, adhesive ability is main.
Electronics Forum | Mon May 22 03:24:37 EDT 2006 | slaine
Hi below is a link to a database set up that list the properties of all SAC alloys, worth reading. http://www.europeanleadfree.net/POOLED/DOCUMENTS/a178886/ELFNET_COST531_Solder_Alloy_Properties_Database_v1.pdf its from http://www.europeanleadfree.
Electronics Forum | Wed Jun 28 07:07:52 EDT 2000 | David Smith
Can anybody help me with finding information on the mechanical properties of PCB materials, particularly with reference to vibration analyses. Thanks
Electronics Forum | Fri Jun 02 15:53:51 EDT 2000 | James Burrell
I'm considering using Delmat, or some equivalent material, as a stiffener for rather large pcb, but I don't know the material properties. Specifically I'm interested in: Young's Modulus, E Poisson Ratio, nu Density, rho Strength, Thanks, Jim
