Electronics Forum | Fri Apr 27 15:44:49 EDT 2007 | jsmith01
Does anyone know of a supplier of titanium edge protectors in the US?
Electronics Forum | Fri Apr 27 18:20:08 EDT 2007 | coop
Integrated Ideas& Technologies, and Fancort one of these companies should have what your after. good luck
Electronics Forum | Sat Apr 28 11:46:14 EDT 2007 | Tom
I think HMC Hub Material used to have these. http://www.hmcelectronics.com/
Electronics Forum | Tue Apr 20 12:38:21 EDT 2004 | Process Tech
I use ESD Safe Document Protectors by Desco Ind. They are carried in the Contact East Catalog.
Electronics Forum | Fri May 21 08:11:54 EDT 2004 | Chunks
Check the surge protector on top of the power supply. Pretty common problem on the 265s.
Electronics Forum | Fri Nov 04 07:20:27 EST 2005 | chunks
By-pass the surge protector on top of the power supply. Located at the bottom of the machine. Pretty common on older 265s.
Electronics Forum | Sat May 13 07:03:16 EDT 2000 | Sal
guys, Currently running a very high volume product, with the gold fingers at the edge of the board masked off using Kapton tape to avoid any form of contamination during reflow and wavesoldering. I've heard alot of about the gold finger gloves, my q
Electronics Forum | Tue Jul 14 08:09:42 EDT 2009 | fujiphil
Check the following: 1. Cam Motor cooling fan. Check if the fan is running or not. Clean the cooling fan cover. 2. Check the oil coolant control box. Check all the contactors does not trip. 3. Check the circuit protector M1CP8, M1CP9 and M1CP10. One
Electronics Forum | Wed Jun 25 08:50:54 EDT 2003 | russ
I believe that Fancort makes some finger protectors that are made of Metal (Aluminum, titanium, etc...) I don't know how well these would process through placement equipment however due to their thickness. Could you clean the Kapton residue off just
Electronics Forum | Tue Nov 28 21:07:44 EST 2000 | Alvin K
Gold is porous and spots on gold plated PCBs is one of the drawbacks of using gold as a solderability protector. Base Nickel exposure seems to be the cause of this and is aggravated when the gold thickness is less than what it should be. I agree with