Electronics Forum | Fri Dec 09 06:25:53 EST 2005 | ajay
thanks for info Most of the defect soldering joint do not take place. Observe that PCB not cleaned properly & also component wetting not good. testing staff expect that all card what ever they receiev shuld be 100% ok. they straight forward complain
Electronics Forum | Sat Jun 21 23:15:07 EDT 2008 | mika
Also keep in mind that the CCGA column length tolerance is at minimum +/- 0.13mm from most part manufactures and they don't collapse in the same way as a BGA, therefore the paste height deposit could be critical in some rare circumstances. Board warp
Electronics Forum | Fri Sep 29 13:51:46 EDT 2000 | C. Ortner
We work in a "low" volume high reliability house building mixed tech double sided multi layer CCA's for long lived space applications. Our present problem is inspection questioning every dimple/anomaly on every leadless part(we put passives only thr
Electronics Forum | Mon Feb 26 20:02:42 EST 2001 | davef
First, I don�t understand why your board fabricator can�t do a good job plugging your vias. Additionally, when you consider that they forgot to plug the first batch of boards, it makes me wonder if they are desirable as a supplier. Generally, we us
Electronics Forum | Wed Mar 03 14:16:59 EST 2010 | davef
First, we expect that your equipment supplier would help you with this. Then again with lots of used equipment flying around, some of the basic stuff often gets pushed to the back of the bus. Second, here is a clip and paste on the basics of equipm
Electronics Forum | Tue May 22 19:28:31 EDT 2012 | Rick Thompson
Are there any established acceptance criteria for contaminants based on Ion Chromatography testing? I've found some references to certain levels for some contaminants but there doesn't seem to be any industry consensus. Any feedback or reference to l
Electronics Forum | Wed May 23 10:11:43 EDT 2012 | blnorman
Simple answer is no, there is no universally acknowledged acceptance criteria. Some time ago, I started a spreadsheet with the acceptance levels suggested by various labs on the individual ionic species. All are relatively close in their individual
Electronics Forum | Thu Aug 31 07:42:25 EDT 2006 | davef
IPC-SM-785 - Guidelines For Accelerated Reliability Testing Of SM Solder Attachments
Electronics Forum | Wed Aug 30 21:59:47 EDT 2006 | YQ Deng
Dear Davef, Sorry for late reply! CMK is a PCB supplier, BGA solder defect were found in CMK PCB. is there other method to verify the BGA soler criteria, such as reliability test?
Electronics Forum | Thu May 03 12:59:55 EDT 2018 | donnie15
Our customer is asking for a solder ball dispersion test on our string solder for rework. The do not provide a test spec, only the attached diagram? has anyone seen this before? It looks like just pushing the solder against the iron and counting th
.gif)