Electronics Forum | Tue Feb 19 08:08:29 EST 2013 | williamaxler
My company is starting to look into Conformal Coating Equipment. From preliminary talks it sounds like we would like to use a UV material. I have a few question I was hoping as a group you all would be able to pass along some insight. 1. Do any of
Electronics Forum | Thu Jun 11 15:26:29 EDT 2009 | diamondmt
Hoss67, Instead of investing into a machine to coat these assemblies we (Diamond MT) are a coating house that can certianly meet your requirements as well as giving a vre competitive price. It would certainly save time and money trying to learn the s
Electronics Forum | Mon Jun 07 07:39:08 EDT 2004 | pjc
Check out the new Prism from Ultrasonic Systems, Inc. Go to http://www.ultraspray.com/spraycoating/index.htm
Electronics Forum | Tue Jul 16 02:48:54 EDT 2013 | trottmann
...Welcome to the dark side of Inspection... Does anybody have experience? Which Manufacturer has the best System? Whats the Problems? What equipment do you use and why? Best regards from the sunny side of Bavaria
Electronics Forum | Tue Jan 10 22:10:29 EST 2012 | doncattoni
Hello Austin, Sorry for the delayed response. There are different types of cures for conformal coating such as RTV which stands for Room Temperature Vulcanising which means they are cured by the humidity in the air. This type of cure does not need
Electronics Forum | Fri Jun 12 17:26:48 EDT 2009 | sadamson
I'm not the Asymtek expert on this subject but you have to run a ROI study. When you buy a system you have to look at how much time you are spending on masking. If every job is a one board special, then you may be better off spraying on a coating. Ho
Electronics Forum | Fri Jul 24 06:50:58 EDT 1998 | Wayne
| Hey youse guyz... | We're finally getting our first real job at the start-up I'm working at. It's actually a pretty unique little board too. Simple as all get out, but unique. You're not gonna believe what this goes into...guess? (I bet ya' you'll
Electronics Forum | Wed Nov 11 08:37:46 EST 1998 | Wayne Bracy
| I have a need to dispense a latex masking material using an automated dispensing system. We are presently looking at the I&J750. Does anyone have any experience with this piece of equipment, or have a better solution available? | Doug: You mig
Electronics Forum | Fri Nov 04 13:35:17 EDT 2011 | travishemen
Nordson has a viscosity control system and a laser fan width control option. We use the viscosity control system on our machine. Basically it heats the material to a set temp. The laser fan width measures the spray pattern width with a laser and a
Electronics Forum | Tue Jul 28 17:35:07 EDT 1998 | Brian Stumm
Steve, I know it is tempting to go for the cheapest method of applying conformal coatings but I must warn you. If you are a contract manufacturer then you don't want to limit yourself in the types of coatings you can work with. Just as soon as you se