Electronics Forum | Mon Aug 09 07:13:08 EDT 2010 | raghu
We have PVA 354Bench top conformal coating machine. We are going to procure the Humiseal 1B31 material. Is this material is suitable for this model of machine? Is there any special pecautions to be taken while programming? What are the main problemsd
Electronics Forum | Tue Aug 10 01:02:31 EDT 2010 | raghu
We have PVA 354Bench top conformal coating machine. We are going to procure the Humiseal 1B31 material. Is this material is suitable for this model of machine? Is there any special pecautions to be taken while programming? What are the main problems
Electronics Forum | Fri Sep 11 12:08:10 EDT 2015 | derrikf
I built one using an old Asymtek Automove. When all was said and done, it cost less than $400, including what was paid for the machine itself. It's a very basic setup, (air over syringe), but for our needs it does everything and more. With air to syr
Electronics Forum | Mon Sep 30 16:16:17 EDT 2019 | stephendo
We use "Uline N95 Deluxe Industrial Respirator" face masks. We are looking for something better. Our conformal coating machine has an active exhaust pulling fumes out and the door is closed when the machine is running. We have a fume hood with an act
Electronics Forum | Thu Jul 05 22:56:53 EDT 2007 | gyverlo
Hello Sirs: Recently we are having an issue with environmental stress (high humidity or moisture), so we decide to apply conformal coating on our motherboard to protect via holes. According to IPC-A-610D, spec of thickness for type AR is 0.03~0.13 m
Electronics Forum | Tue Jul 03 01:54:42 EDT 2018 | rdhiman1
Reaching out to all conformal coating experts, please help! While setting up conformal coating using the automated atomized spray, we observing issues associated with conformal coating wetting on the following regions: 1) Component edges 2) Metalli
Electronics Forum | Wed Sep 02 11:36:22 EDT 2009 | kpm135
Is this an established process that is just now exhibiting these problems, or is this a brand new process you're just setting up? What is the rest of your process like? What is done to the boards before you coat them? Water washed? Solvent washed? Sa
Electronics Forum | Mon Oct 30 22:22:08 EDT 2023 | cbeneat
We've used PVA (Precision Valve Automation) for years. Programming is straight forward. Can do simple areas to more complex, depending on valve choices and complexity of what you need to spray. We use a standard pray valve as well as a syringe. We da
Electronics Forum | Mon Dec 11 19:21:32 EST 2023 | SMTA-64387074
PVA and Specialty Coating Systems both have equipment that are easy to program and maintain. It is a spray booth so maintenance needs to be regular or you will have quite the headache. We have a conformal coating line with 2 coaters a board flipper a
Electronics Forum | Wed Feb 11 11:53:42 EST 2004 | Maryann
Our company strictly does selective conformal coating applications for the customer. We will quite often see one side looks great, and the other side doesn't. We often see dewetting around holes, and have found this can be a possible flux build up. A
