Electronics Forum | Thu Sep 26 23:14:25 EDT 2013 | zsoden
We picked up this old (circa late 80s) Seho 1135 machine last year for next to nothing. It needed a bit of TLC to bring it back to working order but it's 99% working now. The only problem left is that we cannot get sufficient height from the delta wa
Electronics Forum | Wed May 09 03:13:06 EDT 2012 | umar
I had send my coating board to the test lab for adhesion coating test. 3 times send, the result 3times fail. The coating chemical use is Humiseal 1B31. The process is clean the boards at washing process use the Vigon A200 saponifier mix with DI wate
Electronics Forum | Fri Oct 09 16:07:30 EDT 2009 | dlabelle
We use Dow 2620 silicone conformal coat applied with PVA1000 sprayer machine. If used on a daily bases, we have no problem. If we let the machine sit idle for over a week, we will get bubbles in the conformal coating. Sometimes, purging the line w
Electronics Forum | Thu Jan 10 06:52:51 EST 2002 | Dreamsniper
I'm using Kic Profiler and aluminium tape from Kic and thermocouples from Kic. They are good and reliable. I even manage to modify my heller 1088 by adjusting the fix conveyor and re-baffling the oven. Had dropped my 20-22 deg. C delta T down to 4.3
Electronics Forum | Wed Jun 26 10:36:24 EDT 2002 | Steve L
Thanks for all of your valuable inputs. The paste we are useing is PWS0111Ae36 (Alpha MEtal), peak temp from 210 to 225 C. The paste was on the floor about 3 weeks. ianchan, when you mentioned "no more than 6 hrs in the stencil", you mean no more t
Electronics Forum | Wed Feb 02 20:00:48 EST 2005 | davef
150*C/min * Determining the distance it takes to lower the delta temperature at the current conveyor speed: [150*C/min]/[25 inch/min] = 6*C/inch * Calculating how much of this 6*C/inch would be spread along the length of the 0805 capacitor: [6*C/inch
Electronics Forum | Tue Dec 28 10:04:01 EST 2004 | Mark
No delta T issues as I am not actually reflowing the component to the PCB. This is for moisture sensitivity testing as per JEDEC 020C Standard. Trying to duplicate a profile in the standard and am having trouble reaching a component ramp rate of 3
Electronics Forum | Thu Aug 12 14:55:08 EDT 2004 | johnw
Hi guys I havnt been on for a while so its nice to be back been working in europe mostly Fuji CP6 skewing rnets Marcels comment is the closest rnets are a problem as said before the main areas are 1 A good assmbley shape is a must with 30% defaul
Electronics Forum | Sun Jul 29 23:58:08 EDT 2001 | Frank
Hi Dave Thanks for your information. The problem that I found is paste not stick well on pads ( solder paste printing process). When the table move down (PCB saperate from stencil) some of paste stick on aperture instead pads. Solder paste : Delta
Electronics Forum | Mon Mar 11 07:58:59 EDT 2013 | cyber_wolf
So I have this issue with my 1240. During my weekly oven surveyor check I get a software alarm that says I am out of tolerance. Probe #3 which is closest to the hinge side of the oven is approx. 10 degrees hotter in zone 12 than the other 2 probes o
