Electronics Forum | Tue Mar 21 17:32:48 EST 2000 | Charles Barker
Greetings all you knowledgable SMT persons! 1. Typically, for multi-layer (6-8 layers), FR4, SMT boards stored in an air conditioned environment at about 50+/- 10% RH, how many months (or years) would you allow to pass before you would recommend bak
Electronics Forum | Wed Jan 30 05:36:04 EST 2002 | vincent_f
Hello everybody, I would like to use PCB which have expired. I have already planned to bake them in order to avoid pop corn effect but I wonder about some few items : 1) How can I identify the optimal baking parameters ? 2) Even after baking, is the
Electronics Forum | Mon May 24 10:45:04 EDT 1999 | John Thorup
| Can anyone help me with the correct baking cycle for removing moisture for PWB's. These are 10 layer double sided SMT. | | Thank You R. J. Klein Wassink in Soldering in Electronics states - 16 hours @ 105C or 40 hours @ 80C in a ventilated oven
Electronics Forum | Tue Jul 18 18:53:23 EDT 2006 | Mike F
Is it showing up after wave or reflow soldering, or after hand soldering? If the delamination or blister bridges between traces you have the potential for a short circuit between those traces. A delamination might be repairable, but in most cases i
Electronics Forum | Wed Apr 24 21:35:34 EDT 2002 | davef
Ooooo, much better. Tough to say, because of all the variables [ie, different materials, moisture level, temperature, etc]. Plastic encapsulated devices, especially IC, absorb water from the air, which is violently released during soldering. Typica
Electronics Forum | Fri Aug 10 16:22:35 EDT 2007 | htran
Davef, The J Standard-001-DS(Ref. 4.9.3)does required board assembly bake out and the purpose of the bake out is to demoisturize the PWB and to prevent board delamination during reflow like you have mentioned earlier. Thanks for your inputs. I hav
Electronics Forum | Wed Jul 20 10:07:05 EDT 2005 | cecil
Does anyone have any input on the need to bake out an assembly prior to the conformal coat process? I understand baking out components/pwb's prior to processing through the reflow or wave solder process if the material shows excess moisture absorbtio
Electronics Forum | Mon Dec 08 18:25:35 EST 2008 | yuepingwu
Hi Bob, Do you have information about IPC D-35 for reference? What moisture sensitive level is the Sn-Pb/RoHS of PWB? Does PWB supplier start to implement PWB drying packaging?
Electronics Forum | Wed Mar 29 04:14:49 EST 2000 | Marc
Charlie B: You mentioned that you have an air conditioned environment and a RH 0rf 50, baking the boards is predominately done when the history of the PCB delivery and / or previous storage conditions are un known. When I was with a CM, we did this a
Electronics Forum | Fri Jan 05 20:12:22 EST 2007 | engr
I am using PWB material Rogers 6002 High Frequency Laminate. The PWBs are assembled. They were washed and will require a bake out. Some people say, no bake out is required for the material. I am getting different reads in test if the CCAs are not
