Electronics Forum | Mon Jan 08 18:58:27 EST 2007 | Mike F
Normally someone would have replied to tell you to do a search of the archives. I've read at least 4 or 5 different threads dealing with baking out PWB's, but none were for this special material. First, have you contacted the manufacturer of the PW
Electronics Forum | Thu Oct 26 13:56:08 EDT 2000 | ptvianc
Hello: Pre-baking laminates should only be performed:(1) to meet contractual agreements or (2) in response to an actual defect that can be traced to PWB water absortion. Besides the fact that a pre-bake is an enormous process "bottleneck," it also
Electronics Forum | Tue Dec 09 10:04:36 EST 2008 | lazzara55
SMT-ypw: Does PWB supplier start to implement PWB drying packaging? B3: YES! The fabrication of the PCB involves a series of wet processing that requires counter-measures to remove moisure. While some of the PCB processes also include bake cycles th
Electronics Forum | Thu May 06 18:31:29 EDT 2004 | Dreamsniper
"Polymide Films absorb a great deal of moisture. Polymide laminates must be baked at more than 1 hour at 100'C or better for a double sided PWB prior to exposing the laminate to elevated temperatures such as that required for soldering. Moisture abso
Electronics Forum | Wed Jan 30 17:49:41 EST 2002 | davef
PCB never expire, they just become more difficult to solder. [Many shops impose �shelf life� periods for their boards, but they aren�t going to discard the boards if the exceed the limits, unlike they would with some other process materials.] IDENT
Electronics Forum | Thu Oct 27 11:45:06 EDT 2005 | Jeffm
I have a multi layer (8) PWB with blind vias going from 1 to 7 that is experiencing occasional blistering (delam). It is only on perhaps 15% of the boards run. We vacuum baked (85C, not sure what pressure) a sample lot and still had a few exhibit the
Electronics Forum | Fri Jul 30 17:16:59 EDT 1999 | Dave F
| Hello Netters, | | I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinned on e
Electronics Forum | Sat Nov 22 09:27:18 EST 2008 | davef
IPC-HDBK-001 w/Amendment 1 Handbook and Guide to Supplement J-STD-001 (Includes J-STD-001B to C Comparison). During fabrication and storage, both components and PWBs will often absorb water. If left in the device, this water will vaporize at solderi
Electronics Forum | Thu Feb 12 17:21:07 EST 1998 | Justin Medernach
| I would appreciate any information concerning the wash and bake of blank Printed Circuit Boards | before assembly. | + Is it necessary to wash and bake PCB�s before assembly? | + If any, what is the reason for wash and bake of PCB�s? | + If any, wh
Electronics Forum | Fri Jul 30 17:24:24 EDT 1999 | Dave F
| | Hello Netters, | | | | I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinne
winsouce.jpg)
.gif)
