Electronics Forum | Mon Nov 26 21:03:29 EST 2001 | davef
Hehwoo, bin eatin' turkey up at mums house.
Electronics Forum | Mon Nov 26 20:15:50 EST 2001 | davef
Sounds like you are thinking correctly. I'd guess your fab has gotten "smart" and changed your bare board, as you suggest. So, you've got two choices: 1 Rework the QFP. 2 Remove the lower temperature PTH components and solder them to the board some
Electronics Forum | Sat Mar 08 11:04:47 EST 2003 | Joe
Mark, You've already received some good advice from the other posters. The one thing I would add is that even if you solve your printing issues on this type of part, the relative small quantity of paste may be prone to soldering problems. Ever s
Electronics Forum | Tue Sep 30 20:05:34 EDT 2003 | afm
Does alloy 42 lead frame on a QFP100 make lack of coplanarity (let's say 2 mils), a critical factor to have non-wetted leads? Lead coating is tin lead 90/10. afm
Electronics Forum | Thu Oct 28 09:25:35 EDT 1999 | Dave F
Chris: Typical non-wetting causes are: * Poorly controlled soldering process * Incorrect material * Surface contamination * Insufficient preheat * Misapplied solder mask * Shadowing Without intending to insult you, all of the causes of non-w
Electronics Forum | Mon Jun 25 20:39:08 EDT 2001 | ianchan
Hi mate, no complete info given from what i see, so just some humble comments, mayhaps you review : 1) PCB pad finishing - Copper+nickle plated? coz if so, nickle is a KILLER to good solder wetting. what we did back here, was to HAL coat the nickle
Electronics Forum | Fri Nov 05 10:01:04 EST 1999 | Dave F
Chris: You can have more than "one question!!!" Anyhow, yes crappy solder paste can cause non-wetting, but before you go there understand why the paste is wetting some surfaces, but not others. Ta Dave F
Electronics Forum | Wed Mar 30 01:01:10 EST 2005 | vicknesh28
All, Has there been any finding from the component point of view in terms of non wets after reflow and if yes, can anyone share what was improved on the component to reduce the non wet defective levels. What would be the contribution from the compon
Electronics Forum | Thu May 16 22:37:22 EDT 2002 | xzinxzin
anyone experience to solve the non-wetting on Microleadframe packages component terminal sides. 1)I test the components solderbility in dip and look test, in solder pot at 240 deg C,the wetting on the sides is ok. but I run on mass production in refl
Electronics Forum | Wed Sep 05 08:10:45 EDT 2007 | davef
Questions are: * Do not judge the quality of a solder connection by the shineyness or color of the solder connection. Do you have smooth and unform flow, no pitting, and good wetting to the lead and the pad? * What is the temperature of the leads of