Electronics Forum | Tue Apr 13 10:55:01 EDT 2004 | mnguyen
Spoke with TDK and they told me Unicam or now called Technomatics I think makes a software to program the VC but you can also use dynapert to program the AC-7. Is that true? TDK told me they do not have any software to program the machines using soft
Electronics Forum | Wed Feb 08 16:01:56 EST 2012 | gosswald
Are you using Auto Program to generate the board program? If your camera offset and mod codes are OK I would check your board position settings in Auto Program and make sure they are correct. For me at least, board globals, position, and fidicuals
Electronics Forum | Sat Jun 05 08:45:30 EDT 2004 | vinitverma
Hi Adrian, You need the UFOS program. If you send me the cad data, and the BOM, and the board layout, I can make a sample program for you to check. However the program shall not be optimized and the head nos., feeder nos., and the vision files will
Electronics Forum | Sun Jan 06 19:43:48 EST 2008 | andrewlog
I think Panasert MSR is a good machine. You can easily program these machines using text files. Panasonic pubishes the format. The CM88 is harder to program. You will need to use the PT200 machine controller program. Different text formats can be imp
Electronics Forum | Sat Aug 22 01:56:54 EDT 1998 | Lance A. Smalley
Panapro Host Optimization should actually be very good. Make sure you're not using a fixed setup or the feeder carriage will move alot. Also make sure you do not change parts data in the machine after the program has been generated or speed of the
Electronics Forum | Wed Feb 16 01:06:13 EST 2011 | vinitverma
Dear Gabe, Once you have the mount data in the program, you can move the camera automatically to the location by tracing each location one by one. If I remember it correctly it is done by having the location highlighted in the program and then by pr
Electronics Forum | Fri Apr 30 10:22:10 EDT 2004 | mnguyen
I am having a hard time looking for a programming software for a TDK AC-7 Axial. TDK makes a MFT-30 for their Radial machine but there is no programming software made for the Axial machine. I see in it's file that you can export and import Dynapert f
Electronics Forum | Tue Oct 16 03:15:00 EDT 2001 | Michael Trybula
At my previous job I inherited several lines where tweaking of a few components was allowed. The first thing I did was stop that practice. The problem with tweaking a program is that you are fixing the symptom and not the root cause. When the root
Electronics Forum | Thu Dec 20 12:14:37 EST 2012 | dhopps
If you go with MCS I would recommend using an MCS30. You would have to make sure that the E-Proms for host communication are installed in the MCS and the host module (software)as well. You would then need CadConvert to program and transfer programs
Electronics Forum | Fri Oct 06 05:14:41 EDT 2006 | bobpan
Hey Steve....hahaha.....you dont have to yeild ...just merge....anyways if you create a board directory i think thats when you will be able to make a new program. Remember to put files into an actual directory and not just on c: good luck Bob
