Electronics Forum | Sat Feb 06 09:45:13 EST 2021 | bukas
I would not go there. If you are forced to buy part from different manufacturer because of supply shortage then you will need to make change to machine program and that means a lot of downtime unless you can do that with 2-3 clicks. My company uses I
Electronics Forum | Wed Nov 18 15:10:42 EST 2009 | jlawson
I have been programming Mydata for years. Aegis > is the most flexible. You can program every field > or you can do just the basics and finish it at > the machine. I have used Valor but it wants to > control everything, it dumps the databases eve
Electronics Forum | Thu Dec 15 16:38:50 EST 2011 | davef
Sixth, make sure you have a feedback loop. Through the course of fixing problems, make sure the "fix" is incorporated back into program generation. For example, if a part definition is made or fixed, make sure the new definition or fixed part defin
Electronics Forum | Thu May 28 12:31:46 EDT 2009 | wrongway
We have universal advantis which us there leser machine I could'nt be happier with it we used to have Amistar machines for ten years it worked ok. but the universal lighting head works great we have had our machines for about 2 years now with very li
Electronics Forum | Sat Nov 14 19:27:34 EST 2009 | casmt
I have been programming Mydata for years. Aegis is the most flexible. You can program every field or you can do just the basics and finish it at the machine. I have used Valor but it wants to control everything, it dumps the databases every time you
Electronics Forum | Fri May 26 10:59:56 EDT 2006 | James H
I have a panel with 4 boards on it. All boards have the same orientation. Is there a way to set up an offset to make the program more efficient? I also have a few panels with a couple bad boards on them. Is there a way to set up the program to reco
Electronics Forum | Wed Sep 15 07:33:20 EDT 2004 | RB
Has anyone have any experience whit making SMT-programs whit Valor. I mean is it possible to make one that is 100% fitted for a smt-line?
Electronics Forum | Thu Apr 02 09:49:10 EDT 2020 | stephendo
The problem is not with the software. The problem is with the data format. Gerber data is a photo plotting format. It essentially makes pictures. There is no way to make PnP programs easily from pictures.
Electronics Forum | Mon Oct 22 10:47:32 EDT 2007 | cyber_wolf
You absoultely must have a calibration jig. You should be able to justify this on downtime alone. Make sure your take up axles and white rollers are squeeky clean on the 12's. Also make sure that they are not running the cam speed too fast. We do no
Electronics Forum | Tue Sep 14 00:35:47 EDT 2010 | sachu_70
The PPS helps to prepare a program off-line without affecting on-line production. However, there are certain efforts that we must consider, such as identifying the part orientation on feeder vis-a-vis its placement orienation on PCB, and confirming s
.gif)
