Electronics Forum | Wed Jan 30 10:07:18 EST 2008 | whirlyspud
As the subject says, I am in need of a Joystick for a Quad Qsp-2. If you have one, or have any ideas on where to look for one I would appreciate it. Mike
Electronics Forum | Wed Jan 30 12:02:24 EST 2008 | bobpan
The manufacturer of the joystick will repair them. The cost is still expensive but much less than the price for a new one.
Electronics Forum | Wed Jan 30 10:21:36 EST 2008 | jax
Haven't used Quad in a long time but here is what I have in my system for that item: Precision Placement Machines, Inc. (Fremont, NH) Part # 5-1567-025-5 Price $1750.00 Contact Info: Phone # 603-895-5112 Quad will charge around $2750.00
Electronics Forum | Thu Jul 22 11:51:49 EDT 2004 | Steve
I have found a company called Cleveland Motion Control that will fix them for a flat fee. Did a little searching and found them using Altavista.com Cheers
Electronics Forum | Wed Jul 03 07:49:35 EDT 2019 | daniel_marquette
Got it. Servo tuning is new to us, so we'll try it. When you propose to swap the Y axis amps, do you refer to the driver that controls the Y motors? Thanks,
Electronics Forum | Tue Jul 29 17:59:53 EDT 2014 | guts1872
I have had to flush the ram when replacing a TEP controller. These are kind of scetchy instructions from my notes, never could get PPM to send me any procedures. Hope this helps. Plug keyboard and monitor into RT computer and navigate to 2kla/RT/TEP
Electronics Forum | Wed Aug 01 09:36:17 EDT 2001 | Pete Barton
Jay, > > I agree with your assement and Chips on > the Quads. I once worked at a shop that had Quads > and DynaPerts(at the time) The perts were > slower(TIME) and required(EFFORT/PEOPLE) more > MAINTENANCE(more effort more people and more > re
| 1 |
.gif)
winsouce.jpg)
