Electronics Forum | Mon Jul 07 08:04:15 EDT 2014 | torch
cheers, will give that a try and get back to you :)
Electronics Forum | Thu Jul 03 09:27:10 EDT 2014 | torch
Hey guys wonder if anyone can help me, having an issue with our Quad QSP2, at the moment it is displaying Tep2 - Send Status command failed Tep1 - Send Status command failed and there is no response from the gantries, the interlocks appear to be wo
Electronics Forum | Thu Jul 03 11:29:27 EDT 2014 | bobpan
oh....by reseat the cards....i mean the transport cards that are located in the top right side of the machine above gantry 2.
Electronics Forum | Wed Jul 30 03:03:12 EDT 2014 | torch
cheers turns out it was both, cards needed reseating and also the ram flushed :) its back up and running now :)
Electronics Forum | Tue Jul 29 17:59:53 EDT 2014 | guts1872
I have had to flush the ram when replacing a TEP controller. These are kind of scetchy instructions from my notes, never could get PPM to send me any procedures. Hope this helps. Plug keyboard and monitor into RT computer and navigate to 2kla/RT/TEP
Electronics Forum | Thu Jul 03 11:27:06 EDT 2014 | bobpan
Try these things: 1. Reseat the cards (with power off) and Reboot the machine and see if the errors clear. 2. Unplug the nozzle changers and try to reboot....sometimes they can mess up the system. 3. If all the above fails.....the b-rams in the card
| 1 |
