Electronics Forum | Wed Mar 05 14:03:12 EST 2014 | jhamlet
We have a Quad QSP-2 that recently started moving the gantries around incredibly fast and erratic at random times, but always while placing on a board. Any help would be appreciated. Thanks.
Electronics Forum | Wed Mar 19 17:18:24 EDT 2014 | aybars
I would suggest to check your servo amps. on both gantries and both axis.Does it rattle both heads or just one? Since you did not specify this in your question,I will say check all 4 servos in the back side of your machine.Hope this will help and goo
Electronics Forum | Thu Mar 06 17:27:17 EST 2014 | bobpan
Does this happen with just 1 gantry? If so...I would think your encoder in that gantry/axis needs cleaned. I have seen digital i/o cards cause this issue. But usually you will notice this when opening and closing the doors. The head would sometimes
Electronics Forum | Wed Jun 02 15:46:08 EDT 2004 | drlou
I have been reading the forum to try and figure out what brands to look at for Pick and Place machines. We need around 3,600 cph, and would like to be able to handle 0402, soic, tssop, and perhaps as little as 0.020" pitch. Max pcb is 9 x 13". Looks
Electronics Forum | Fri Jun 30 09:10:12 EDT 2006 | andyspaziani
We are having continual QuadAlign issues with a 1997 vintage QSP2. Every part on the machine has been replaced� now they want to replace the entire head on gantry one. Does anyone have any experience in this area? Sincerely, Andy Micro Air, Inc.
Electronics Forum | Wed Jun 19 10:11:59 EDT 2019 | jamesn
Hi to everyone I hope someone can help me with a problem I have on a Quad QSP-2. when calibrating ( Or trying to use ) Feeder Bases 2 and 4 on gantry 2 Im getting small amounts of accumulative drift in the X axis. I have changed the servo amplifier
Electronics Forum | Wed Nov 23 10:02:57 EST 2016 | hloranzo
on the quad Qsv1 plus the z1 board has a amber light not green ,,, swap the z2 board and still amber light help please gantry Z1 movement failure
Electronics Forum | Tue Sep 15 11:04:33 EDT 1998 | Jim Price
| We are a small contract assembly shop hand placing SMT. We recently received a large contract for SMD that will require placement rates of at least 6,000 CPH. I am looking at Fuji, Mydata, Quad, and Zevatech. I have little experience with automated
Electronics Forum | Mon May 16 22:06:22 EDT 2011 | danaherr
Downward looking camera not working. swapped cables on board and upward looking camera works when plugged into downward camera's connection on video card. Thinking maybe a cable issue??? manually moved gantry all over trying to see if intermitent ope
Electronics Forum | Thu Jul 03 09:27:10 EDT 2014 | torch
Hey guys wonder if anyone can help me, having an issue with our Quad QSP2, at the moment it is displaying Tep2 - Send Status command failed Tep1 - Send Status command failed and there is no response from the gantries, the interlocks appear to be wo