Electronics Forum | Thu Sep 26 10:04:46 EDT 2013 | nophsem
I tested original 'bad' SRX card in the other machine and it doesn't work, same error: SRX Autobaud Motor error #5 With our QUAD 4C, (Machine speed setting) MC 53= 0 (high speed), I changed =1 (low speed), same error
Electronics Forum | Fri Sep 06 11:27:54 EDT 2013 | nophsem
Yes; I do it IVC V 2.07 1994 Quad SystemP SECS 2 SRX 1.64-6E
Electronics Forum | Thu Mar 03 09:45:27 EST 2011 | vinceprice
Quad IV C problem. Our machine is not placing parts. We can test each component one by one and the machine picks and places the parts correctly. When we run the machine for production it does not pick up the parts. Any ideas?
Electronics Forum | Fri Oct 05 07:22:28 EDT 2018 | dfl
Hi, I just got a Quad IV-c and I'm learning to use it, I got manuals and it is up and running on DOS with windows 3.1 but I noticed that it the Autoprogram is missing, Does anybody has a copy that can share. Regards
Electronics Forum | Wed Sep 25 13:25:13 EDT 2013 | nophsem
Hello bobpan: The machine is a QUAD 4C I turn on the machine and get the error: SRX AUTOBAUD Motor error #5 I removed the battery and then put it back in, the error remains. I removed the battery without put it back in...and turn on the machine,
Electronics Forum | Tue Oct 09 11:17:24 EDT 2018 | dfl
Ok, I will try and post the result. thanks for the help!
Electronics Forum | Wed Jan 30 17:38:32 EST 2019 | bobpan
try at 2 good luck
Electronics Forum | Wed Apr 01 10:17:19 EST 1998 | Stefan Witte
| I have a customer looking to buy Quad 3C Feeders. | He is evaluting the possibility of either buying these | feeders or buying a whole Quad Pick and Place. | Qty: 30 8mm Feeders I do have a source of Quad III C and IV C machines with a total of 200
Electronics Forum | Tue Oct 09 05:38:29 EDT 2018 | dfl
Hi, my Quad IV-c is showing a really dark image on the camera and its VERY difficult to see the components pads to make the adjusts. I already check the monitor brightness (at maximum and I can see the crosshair, so the monitor is good) and already
Electronics Forum | Fri Jan 25 08:54:33 EST 2019 | dfl
For the first time, I'm really looking at to the power transformer for the IV-C pick and place (the big big one, at the middle). As I understood, is this transformer converting the 220V to 127V? I realize that the camera monitor is 127V and the PC PS
