Electronics Forum | Wed Jan 23 14:26:52 EST 2008 | operator
I have seen the bad alignment error many times and never had to replace the head for it. It usually has something to do with the laser windows being dirty or cracked. Also it could be your profile settings. Make sure all of these things are perfect b
Electronics Forum | Thu May 20 09:47:25 EDT 2010 | pforister
Is this a single head Quad IVc or a dual headed line? if it is a dual line you can swap the align cards in the front bay between the two heads and see if the symptom follows. The card on the far right is a transport card, shouldn't need to swap tha
Electronics Forum | Mon Mar 28 10:26:55 EDT 2011 | miroyu
Hello everyone . I received lot of help from people of this forum for which I want to say "thank you" guys. I had problem whit initialization of my Quad 4C which just sits for 2 years after purchase. I manage to locate problem with laser diode on pla
Electronics Forum | Wed Feb 11 09:29:59 EST 2015 | bobpan
A reading of 1 almost always means that there is something on the lens or possibly dust inside the unit blocking the laser and tricking the machine into thinking the nozzle is already down when it starts to step from the home 'up' position. Usually i
Electronics Forum | Fri Mar 11 10:51:28 EST 2005 | Micheal
Changed the one from the head board, but no luck. Just wondering if it could be the Quad Align Cable?
Electronics Forum | Mon Oct 01 05:33:15 EDT 2012 | bobpan
wow....nice job....now go get some boards ran...haha!!!
Electronics Forum | Fri Feb 13 07:06:27 EST 2015 | daniel_esposito
Thanks again! I add your mail and web in my contacts. Daniel
Electronics Forum | Mon May 16 15:00:53 EDT 2011 | bobpan
Sorry about taking so long to respond.......The quadalign is a retrofit. You cant just buy a quad-align and mount it on the machine. There is different firmware,cables,and other stuff. Good luck
Electronics Forum | Tue Apr 14 15:01:00 EDT 2009 | mki
Thank you RLM, bobpan, Laser (CyberOptics) was dirty! Now is all OK. You are talking about Quad-Align. I have a lot of QUAD manuals and I still do not understand the diference among QuadAlign, CyberOptics LA and L3 LA! Please, if you can give me s
Electronics Forum | Wed Feb 11 11:12:23 EST 2015 | daniel_esposito
Thank you Bobpan! I checked the laser sensor and could see through the glass a small stripe (dash)in the inside lens, just in the middle of it. Thank you again.
