Electronics Forum | Fri Apr 12 19:20:25 EDT 2013 | microaide
Some progress, now stuck again. I can now generate a pick and place program for two heads that actually runs the head 1 program when loaded into the central controller of machine #1. But all attempts at getting machine #2 to run the head 2 program ha
Electronics Forum | Wed Apr 10 15:05:23 EDT 2013 | microaide
I followed your instructions and did NOT select the option to break up the program for separate central controllers. I now have a program I can copy to central controller #1, and I can delete the head 2 data from the program. Now when I select RUN TH
Electronics Forum | Fri Apr 05 20:00:08 EDT 2013 | microaide
I cheated on the escapement length for the SOLIC plate and got through Feeder Optimization and Generate Program without any errors. Some progress, but no I cant figure out how to the the generated program into the central controllers on the Quad IVc
Electronics Forum | Mon Apr 08 13:53:46 EDT 2013 | leemeyer
I copied a program to a floppy and compared that to the files that were in my AP board directory and they are identical. In your board list directory (on your AP machine) look at picks.asc and places.asc and see if there is any good looking data the
Electronics Forum | Tue Apr 02 13:08:40 EDT 2013 | babe7362000
It has been years since I used autoprogram. But I believe your low reference number is your low slot number on the base and then the ref. is what slot you will teach your feeder ref. to the far left. And the High slot number is the higest slot numb
Electronics Forum | Tue May 10 09:45:53 EDT 2011 | veeckm
After changing mod codes 50,51 and 54,55 respectively on the HHT I will then goto ccconfig.sys file in the central controller software and manually enter in the new mod code values. I do not do any uploading/downloading of mod codes through database
Electronics Forum | Wed Sep 26 15:04:09 EDT 2012 | kahrpr
The QSA30 is basically a Samsung CP40 with a few changes. For an older machine the programming is pretty good. it can do array boards and has an import feature for XY data. Tts been about 7 years since I ran one. Its a pretty solid machine.
Electronics Forum | Mon Jul 09 18:29:19 EDT 2012 | btipcb
I have gotten to what I hope is the last step before I can start running product. However, I have and keep receiving an "Invalid Place Position X" error in three steps of the placement program. I have verified that the camera can indeed find these
Electronics Forum | Tue Jul 25 16:23:33 EDT 2000 | Paul Wright
Vicki, Ask your CAD guys to give you the centroid X-Y data with reference designators in ASCII format. Then import that file into Excel. You can then change the fields and data into the format you need. Make sure you left justify the columns. Af
Electronics Forum | Mon Apr 08 19:06:52 EDT 2013 | microaide
So my board is called 850152, and is in a folder called BRD297XX.DIR. AutoProgram generates the pick and place program (for two heads) without error. When it does, two more "boards" appear. 850152A B1 in folder BRD2C7XX.DIR, and 850152A B2 in folder
