Electronics Forum: quad qsa pick (Page 1 of 29)

Advice on used pick and place machine

Electronics Forum | Mon Oct 09 07:50:22 EDT 2006 | quad

We currently run two Quad IVC's (we are very pleased with them) and two Versatronics for simple small volume batch work. We now need an additional machine capable of placing components at least three times as quickly as a IVC. We don't do anything ve

quad 4c

Electronics Forum | Wed Nov 27 18:10:41 EST 2002 | andrewbrook

Quad4C's have their moments. If the price is right and you are aware of the machines limitations then you will be satisfied. The placement rate is slow, 1.2 seconds/chip. Don't buy any Quad if it has the CyberOptics Laser unit, the Quadalign unit is

quad 4c

Electronics Forum | Wed Nov 27 09:51:08 EST 2002 | Claude_Couture

I have worked with 4c's for two years. The feeders are "tinker toys" with a mechanism that slips, so the pick-up has to be adjusted several times as the reel is used, especially with 13" reels. The worm gear was plastic on the steel shaft of the moto

quad 4c autoprogram

Electronics Forum | Mon Mar 06 20:50:47 EST 2017 | arachid

Hi, I get a old pick and place machine quad 4c. I don't have manuel for autoprogram. i think version 4.4. anybody know where I can find it? Thanks

quad 4c automatic paste dispencer

Electronics Forum | Sat Jun 17 04:07:49 EDT 2017 | arachid

Hi, i have a quad 4c, i like to know is it posible to add an automatic paste dispencer for this pick and place machine? if yes every body can helpme to find one and find how to install it? Thanks

quad 4c automatic paste dispencer

Electronics Forum | Mon Jun 19 09:47:01 EDT 2017 | dleeper

Quad made an auger style dispenser that mounted to the pick and place head. A long time ago, in CM far far away, I tried to add one to a Quad 4C but could never get the damn thing to work. The folks at PPM http://www.goppm.com/ might be able to he

Advice on used pick and place machine

Electronics Forum | Mon Oct 09 13:36:30 EDT 2006 | ppminc

Phil, The QSA-30 was built by Sam Sung, Sold by Quad. Single Head 2 Nozzles around 11K CPH Quad does not support the machine but I believe you can get parts direct from Sam Sung. I am not sure if they have a registration fee. The QSA used Quad made

Advice on used pick and place machine

Electronics Forum | Tue Oct 10 15:14:43 EDT 2006 | mfoster

Hi Phil, Most parts are still available for the Quad/Samsung QSA-30, through Dynatech (in North America). It is actually a single gantry, 3 spindle machine with rated speed of 14,000 cph. As with any used machine, it could be a great deal or a not

Component pick up test

Electronics Forum | Mon Oct 03 13:37:40 EDT 2016 | chabscan

I've been having some problems with my Quad 4C, it rejects some components after having pikced them up. I want to adjust the tolerances and test the pick up. I want to know if there is some way of testing the pick up without having to run my whole

Advice on used pick and place machine

Electronics Forum | Mon Oct 09 18:40:43 EDT 2006 | darby

Seeing you are already using Quad; I'd look at a Samsung CP-45V. I believe your feeders will be compatible but please cheeck to make sure! These are a six head, on the fly machine that will do just about anything you want apart from gripper applicat

  1 2 3 4 5 6 7 8 9 10 Next

quad qsa pick searches for Companies, Equipment, Machines, Suppliers & Information

SMT feeders

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
Best SMT Reflow Oven

High Throughput Reflow Oven
pressure curing ovens

High Precision Fluid Dispensers
convection smt reflow ovens

World's Best Reflow Oven Customizable for Unique Applications


500+ original new CF081CR CN081CR FEEDER in stock