Electronics Forum | Mon Nov 02 23:01:59 EST 2015 | dan59314
RvConverter AOI/AVI CDR tools free download Users Manual: http://www.rasvector.url.tw/RvConverter/RvConverter使用手冊.pdf Easy to use : Generate AOI data in just 2~3 steps. 1. Load File. 2. define Output Region/Resolution(Optional)
Electronics Forum | Thu Apr 17 16:43:09 EDT 2003 | davef
Background: * Bulwith, Ronald A., �Failure Analysis of Solder Joints�, �Insulation/Circuits� magazine, February 1978 * Banks, Donald R., et al., �The Effects of Solder Joint Voiding on Plastic Ball Grid Array Reliability�, Proceedings of the Technica
Electronics Forum | Tue Aug 01 19:52:19 EDT 2006 | darby
If your frame size is 730mm x 730mm then you can't move it left or right. If it smaller than that then the frame adapter will give you more leeway. I am not too sure by what you mean by "If I had a 6" board, and a stencil with cut-outs for both side
Electronics Forum | Fri Jul 04 03:22:31 EDT 2014 | sramos
Thanks Rob for your meaningful advice. Instead of just a general average time per component, I think if we have 3 averages, 1 per "component group", we will gain significant accuracy in the cost model. For instance, a motherboard may have 2500+ R and
Electronics Forum | Mon Feb 20 17:56:46 EST 2006 | Chris
If you are running FR4 PCBs and not something exotic like Kapton flex circuits, I would go with the Dek 265 any day of the week. You will find that Dek supports the fully automatic printer much better than the semiautomatic printers like the 260, 24
Electronics Forum | Mon Sep 06 08:05:51 EDT 1999 | stefano bolleri
| We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji doe
Electronics Forum | Mon Sep 06 14:01:08 EDT 1999 | KEVIN SIMPSON
| | We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji d
Electronics Forum | Wed Nov 12 06:23:09 EST 2008 | griffin
One thing to consider regarding the capacitor, The leads are not 100% straight beneath the plastic bottom part. And if you align with regards to the two leads, the leads will be aligned to the pads of your board, but the body of the capacitor is look
Electronics Forum | Tue Nov 09 13:36:03 EST 2004 | russ
If I remember correctly since I cannot find my copy of IPC 600, I believe that the 20% reduction applies to "defects" and not the total etch process. By the way what is being used to measure down to .0005"? For this measurement to be correct it wou
Electronics Forum | Thu Nov 17 22:30:01 EST 2011 | olddog
Hi again Bob, I'll go by your item numbers: 1. OK, I'll not worry about it. 2. Somehow, it seems to me that it must be doing something or in Run Step Placements there wouldn't be different behavior for Alignment type 0 vs. other settings. I know I'
