Electronics Forum | Mon Aug 20 05:53:26 EDT 2007 | erhard
Hello all, we are about to modify a Universal Radial 5 so the machine will be able to insert radial components with lead pitch 3.5mm and 5mm. The 3.5mm components are ELCOs which are getting inserted all the way to the component body so they sit fi
Electronics Forum | Thu Apr 05 12:45:45 EDT 2001 | Claude_Couture
On mixed technology PCBs, we find numerous blow holes on the solder joints of radial parts (electrolytics, LEDs, etc). The solution that works so far is to cut the leads very long in the radial inserter so that the part is kinda loose and the air in
Electronics Forum | Fri Apr 06 11:37:19 EDT 2001 | raton
We had the same problem years ago when we started using a radial inserter. The inserter would dutyfully insert and clinch the leads. The problem in our case was the component body sealing to the fab, especially on electrolytics caps with a film jac
Electronics Forum | Mon Aug 20 15:53:52 EDT 2007 | erhard
Manufacturing already tried to get a design change but no chance. I guess because the designer is afraid the components could get bent too much if they are mounted with a stand off. Of course everyone who has to manufacture this fist sais: why don't
Electronics Forum | Mon Aug 20 10:03:48 EDT 2007 | slthomas
Wow. Never have, never would, but that doesn't mean it couldn't be done. Mostly it just seems impossible to design a carrier clip that could hold both well...more likely it would hold one well and the other poorly, or both poorly. Anyway, is there
Electronics Forum | Mon Sep 14 13:12:41 EDT 1998 | Phil Teerink
I have an old Dip inserter that management would like to get running, as it has been sitting for about 5 yrs Not a problem, as it seems in good condition, but i have "inheirited" it from the previous tech, and no one seems to know how to run it or wh
Electronics Forum | Fri Dec 10 02:25:22 EST 2004 | dipnetfan
Sorry to bother you guys but I am way out of my leaque here. A tenant left me with a bunch of stuff including a Dynapert vcd-e/k2 inserter and a model b sequencer-- instead of the rent. They light up and move, but this stuff is not what we do. I can'
Electronics Forum | Mon Sep 14 20:59:30 EDT 1998 | Dave F
| I have an old Dip inserter that management would like to get running, as it has been sitting for about 5 yrs | Not a problem, as it seems in good condition, but i have "inheirited" it from the previous tech, and no one seems to know how to run it o
Electronics Forum | Wed Aug 27 11:38:43 EDT 2003 | samaniegocesar
Hello to all, I would like to know if some of you know where can I get spare parts for TDK Radial insertion machine VC-4H or if you know some web page handling support for this kind of machines, I will apreciate any information and support received.
Electronics Forum | Thu Apr 05 13:54:18 EDT 2001 | CAL
Do the parts sit directly on the PCB? Typical 2.0 mm Max is desired for the component to be off the PCB. Are stand-offs an option? The long lead wiggles as it passes through the wave and thus agitating the air out.Does your wave a "dancer" option?
