Electronics Forum | Wed May 27 10:26:35 EDT 2015 | jodonoghue
hi a long shot but i am looking for help trying to source a cable from a universal rad 5 sequencer . it is the cable that goes between the interupt sensor and the i/o box .. any help would be appreciated or help on where to look thanks in advance
Electronics Forum | Wed May 27 14:20:14 EDT 2015 | travishemen
Try Dan Chretien at Southwest Automation Consultants. He has helped us with many parts. http://www.southwestautomationconsultants.com/ 928-853-2090 swuicsup@aol.com
Electronics Forum | Wed May 27 15:48:21 EDT 2015 | alpha1
Do you have a part number we probably have it. Don Burshnick Alpha 1 Technologies
Electronics Forum | Wed Aug 27 11:38:43 EDT 2003 | samaniegocesar
Hello to all, I would like to know if some of you know where can I get spare parts for TDK Radial insertion machine VC-4H or if you know some web page handling support for this kind of machines, I will apreciate any information and support received.
Electronics Forum | Wed Aug 27 21:03:03 EDT 2003 | davef
What does TDK [ http://www.component.tdk.com/fa/factoryautomation.html ] say?
Electronics Forum | Thu Apr 05 12:45:45 EDT 2001 | Claude_Couture
On mixed technology PCBs, we find numerous blow holes on the solder joints of radial parts (electrolytics, LEDs, etc). The solution that works so far is to cut the leads very long in the radial inserter so that the part is kinda loose and the air in
Electronics Forum | Mon Aug 20 05:53:26 EDT 2007 | erhard
Hello all, we are about to modify a Universal Radial 5 so the machine will be able to insert radial components with lead pitch 3.5mm and 5mm. The 3.5mm components are ELCOs which are getting inserted all the way to the component body so they sit fi
Electronics Forum | Thu Apr 05 22:27:06 EDT 2001 | davef
As a band-aid, consider running your chip wave when soldering these boards [Similar to Cals "dance with me babe" suggestion.] If the problem is as broad based as you say and the radial components have a tight fit, consider increasing the holes by a
Electronics Forum | Fri Apr 06 16:19:12 EDT 2001 | davef
We build a mixed tech [eg, QFP, SMT fly shit, DIP] board where we can't clinch the DIP. So we set the clinch and cut on the DIP to just barely clinch, leaving the leads very perpendicular to the board. I wonder if you could do something similar wit
Electronics Forum | Thu Apr 05 13:54:18 EDT 2001 | CAL
Do the parts sit directly on the PCB? Typical 2.0 mm Max is desired for the component to be off the PCB. Are stand-offs an option? The long lead wiggles as it passes through the wave and thus agitating the air out.Does your wave a "dancer" option?
winsouce.jpg)