Electronics Forum | Tue Jun 12 20:54:34 EDT 2018 | dekhead
I don't recall a "Heavy Pallet Rails" option in software; I believe you need to change the Remote Board Stop to "Not Fitted" and move the pneumatic and electrical (BSK6)connections to correspond with the camera mounted board stop. Pretty well detaile
Electronics Forum | Wed Feb 25 02:50:33 EST 1998 | Scott McKee
| I am currently evaluating some different reflow ovens | for a future purchase. The manufacturers we are | looking at are Conceptronic, BTU, and Heller. Any | feedback on these manufacturers would be welcome. | I am particularly interested in: | 1
Electronics Forum | Tue Aug 20 10:07:44 EDT 2013 | mccabekev
I moved the fixed rail in by about 2 inches and it seems to have done the trick. Rail movement is easy, moving machine to keep all conveyors in line not so easy
Electronics Forum | Fri Sep 07 16:53:37 EDT 2012 | burb1999
We have Heller, 1707EXL now. It has a removable support for the mesh conveyor that just pull out (clipped in). Had an Electrovert and they were bolted on and very tuff to change out. The oilers Im not sure I care for though,they have a metal rail t
Electronics Forum | Mon Sep 29 18:37:22 EDT 2014 | spoiltforchoice
Don't know if you can do it on a MyData, but I have found that I lower the rate of failed pickups on our machine by altering the placement order of devices. Specifically insisting it does not attempt to pick sequential parts from the same lane. Of co
Electronics Forum | Fri Feb 27 12:06:03 EST 2004 | jseagle
A 20 x 20 frame with the image centered will drop in IF you have a printer with adjustable rails for the stencil, the rails move in and out to accomodate 29 x 29 to smaller than 20 x 20. Otherwise, you will need the adapter. James
Electronics Forum | Sat Jan 31 00:06:15 EST 2009 | comatose
Makes product changeovers a little tricky if the wrong conveyor rail is moving...
Electronics Forum | Sun Oct 30 06:13:23 EST 2005 | mika
I am sorry for my poor english, but perhaps you will undertsand:-) The important thing is to get the conveyors straight: The front fixed rail must be parallel with the next one and also the heigt. The heihgt of the prior conveyour should be (but not
Electronics Forum | Mon Dec 03 15:06:36 EST 2018 | proceng1
We've been doing some testing. It seems that if you move the rail IN to achieve the correct width, the exit is maybe .125" wider than the entrance. If you move it OUT to achieve the width, the exit is .25" more narrow than the entrance. So I believ
Electronics Forum | Thu Jan 13 15:17:27 EST 2022 | goseese
Thank you very much I will look for something moving, loose or getting pinched when the table moves. -- Update -- checked every single connector, all the purple cables/connectors too. Everything it tight and not getting hung up. Checked all the
winsouce.jpg)