Electronics Forum | Mon Jun 07 10:05:18 EDT 2004 | adm
Hi Russ I happen to come across a article about reflow profile. Other than Ramp-to-spike(RTS) & Ramp-soak-spike(RSS), its introduce a new reflow profile & call it LSP. Is it possible to give me your email address & I will send the article to you?
Electronics Forum | Wed Feb 20 11:40:31 EST 2019 | bmalhi
Heller Oven comes with a profile pre-loaded so you can start there. RTS = Ramp to Spike. Basically a straight line from preheat to spike. Also known as “Tent” profile RSS = Ramp Soak Spike. This one creates a flat line around 150-180 degrees on th
Electronics Forum | Wed Mar 24 10:04:09 EST 2004 | Marc Apell
183C, 60 +- 15 seconds). The quesiton to use a straight ramp or soak profile comes down to the product your are soldering. The key is to get the whole assembly at the same peak temp (minimized delta) and same TAL for effective formation of the so
Electronics Forum | Tue Sep 02 13:30:11 EDT 2008 | hermes
Try this. Basic reflow profile build up and explanation of its parts: ramp-up, soak or no soak, peak, cooling. Good starting point.
Electronics Forum | Wed Mar 24 08:37:32 EST 2004 | steveliu
Hi, Guys, Can anybody tell me what kind of reflow profile is best for a no clean solder paste: Ramp-Soak-Spike or Ramp-to Spike? The paste we are using is AIM 293DX2B. Thanks a lot.
Electronics Forum | Sun Apr 25 12:24:45 EDT 1999 | Chrys Shea
| Hello all, | | Our guys here still have some questions on the "optimized" profile which sees a more moderate ramp up straight to reflow temperatures versus the conventional profile which has a plateau at around 150 Celsius. If the optimized profi
Electronics Forum | Sun Apr 25 14:43:34 EDT 1999 | Earl Moon
| | Hello all, | | | | Our guys here still have some questions on the "optimized" profile which sees a more moderate ramp up straight to reflow temperatures versus the conventional profile which has a plateau at around 150 Celsius. If the optimized
Electronics Forum | Mon Apr 26 16:39:46 EDT 1999 | JohnW
| | Hello all, | | | | Our guys here still have some questions on the "optimized" profile which sees a more moderate ramp up straight to reflow temperatures versus the conventional profile which has a plateau at around 150 Celsius. If the optimized
Electronics Forum | Thu Aug 24 09:41:46 EDT 2000 | Dr. Ning-Cheng Lee
The optimal profile to choose is determined by the following factors, (1) thermal mass and distribution across the board, (2) reflow temperature range needed for a particular alloy, (3) the nature of flux. When the thermal mass is small, such as cell
Electronics Forum | Tue Sep 09 12:05:44 EDT 2008 | tonyamenson
First and fore most is to find your paste manufacturer spec sheets. Read it over several times and let it all sink in. Then call them with questions as they want to keep your business so their engineers want to help you use their product. I assume y
.gif)