Electronics Forum | Mon Jan 08 07:29:29 EST 2007 | C.fox
i feel that all the response related to ratings are from one person only.
Electronics Forum | Fri Jan 10 09:30:55 EST 2003 | russ
Does anyone know what the voltage ratings on ceramic caps is related to? Would it be safe to use a 50V cap instead of 25V for .01uF X7R bypass/filter caps? Thanks Russ
Electronics Forum | Tue Jan 14 11:30:33 EST 2003 | jsherrow
You may find that the higher volatage rated parts are thicker. Same footpring but "taller". Usually not a problem unless the board is inserted into a mold. BTDT.
Electronics Forum | Fri Jan 10 14:35:59 EST 2003 | russ
Thanks Genny, Mantis, Our line is back up and running! Russ
Electronics Forum | Fri Jan 05 10:54:41 EST 2007 | fastek
Well this sure turned into a Juki lovefest. When do the Quad fanatics start coming out?
Electronics Forum | Fri Jan 05 11:59:08 EST 2007 | stepheniii
I think they are both busy.
Electronics Forum | Mon Jan 08 07:29:12 EST 2007 | C.fox
i feel that all the response are from one person only.
Electronics Forum | Fri Jan 10 14:11:27 EST 2003 | genny
It's always safer to use a higher voltage cap than a lower voltage cap. It isn't a fuse... There is only one case where we dropped the voltage on a cap. We were using a tantalum cap that was rated to 16V, but had been built in the standard packagi
Electronics Forum | Thu Dec 28 22:00:45 EST 2006 | Sue Kim
Hi all, I am doing some research on SMT machines. I would like as many people as possible to rate the following machines 1-6. The number 1 would be the best, number 6, the least desirable of the 6. I realize that there are dozens of factors to con
