Electronics Forum | Tue Jul 19 15:04:10 EDT 2011 | ccouture
Seika make a solder paste recycling unit that will melt solder paste and separate the solder from the flux. You end-up with liquid flux in a jar and a block of solid solder, which you could re-use in a solder wave if the type is the same.
Electronics Forum | Mon Sep 25 17:42:40 EDT 2000 | Steve Thomas
Back in October a post went up re: the fact that a solder manufacturer quit recycling paste, and the responses then weren't encouraging, so I'm gonna stir it up again. I haven't figured out what we're going to do with ours yet and it's piling up. N
Electronics Forum | Mon Apr 07 19:12:13 EDT 2008 | kircchoffs
can we use the expired solder paste and put in a solder pot of wave machine?
Electronics Forum | Mon Jan 10 03:11:11 EST 2000 | Wister
Hi,how to control the solder paste,condition as belows? place at room temp.or put it into refrig.again if the unopened paste has been warmed up 8 hours but it would not been used at once in case of schedule changing.Assuming that this solder paste wi
Electronics Forum | Tue Sep 22 10:05:00 EDT 2009 | roland_grenier
Does anyone know how to calculate solder paste volume required to run a PCBA on an SMT line? I'm looking for a solder paste volume model which include paste waste. Roland
Electronics Forum | Tue Jul 18 18:08:08 EDT 2023 | davef
Vote for: JBC DPM Paste Dispenser Manual Also consider: Metcal 910-MSG Manual Syringe Gun-Kit Spoty micro-dot solder paste syringe dispenser [ https://www.tindie.com/products/avandalen/spoty-micro-dot-solder-paste-syringe-dispenser/ ]
Electronics Forum | Sun Feb 27 13:42:44 EST 2005 | pmdeuel
So true, We had paste flux supplied to us from Alpha metals. It was the same as used in the solder paste. The major problem we noted was the in ability to control the ratio of paste to flux resulting in lots of voids. When we mixed enough to get the
Electronics Forum | Tue Jan 07 23:38:08 EST 2014 | m_imtiaz
want to know the tolerance the paste height in the solder paste printing. for example if stencil thickness is 7 mil, what will the acceptance level of paste height ( upper and lower) kindly share if any guidelines or formula for the same
Electronics Forum | Tue Dec 23 07:38:35 EST 1997 | raymond
how to determine the optimum solder paste height ?
Electronics Forum | Thu Jan 27 01:21:48 EST 2011 | eliezerk
How can I print two various heights of solder paste on the same board , no space for graded stencil
