Electronics Forum | Tue Aug 31 18:34:32 EDT 2010 | aqueous
If the batch cleaner is truly closed loop, then 100% of all of the process fluid (water) is captured, filtered (particulate, carbon, resin) and reused. This answer is based on a traditional closed-loop batch cleaning system with an integrated water
Electronics Forum | Tue Jul 13 01:00:03 EDT 2004 | Shean Dalton
Cleaning RMA fluxes simply requires selecting a washing chemistry (either Solvent, Semi-aqueous or Aqueous) and an appropriate cleaning sytem. Your lot size would be easily handled with a batch system. visit http://www.aat-corp.com/Technical/Def
Electronics Forum | Wed Feb 18 11:21:14 EST 2004 | Mike Konrad
You have two choices� Change your paste or beef-up your wash chemical. I�ll let others discuss paste options but as far as wash chemical is concerned, consider chemicals specifically designed for such applications. Zestron is promoting A300 as sui
Electronics Forum | Mon Nov 24 11:24:34 EST 2003 | Bill
Sorry for the long delay in response.. As it turns out, the float switch on our transfer station was gummed up (probably by the defoamer residue) and allowed the transfer station to get behind (backing up the gravitational flow of the wash system).
Electronics Forum | Wed Aug 14 10:44:04 EDT 2013 | sarason
In my limited experience. A Domestic Dishwasher with no water recycling like which is offered on some of the newer high priced models works a treat. Clearly this is batch. Inline filtering of the water supply is a good ideal. There are several ways o
Electronics Forum | Thu Jan 23 20:57:33 EST 2003 | davef
If the flux was not activated (ran in another area of the board), the flux should be removed from the board. Any Comments? A: We agree. In order for its �benigness� to take effect, NC flux is affected by: * Type of flux * Amount of flux * Proper ac
Electronics Forum | Tue Dec 08 16:53:41 EST 1998 | Ryan Jennens
Hey there Dave! We used to use a batch cleaner when we used water-clean paste. It was similar to a dishwasher, except that it had a digital menu for entering the number of wash cycles, water temp., amount of saponifier (we just used DI water),
Electronics Forum | Wed Sep 10 11:57:14 EDT 2003 | Mike Konrad
First, you must determine a few things: 1. What specific de-fluxing chemical are you going to use? Basic required determinations include the chemical�s pH, is it a VOC (if so, what is its VOC content), what concentration is the chemical used in (1
Electronics Forum | Tue Feb 20 13:10:54 EST 2001 | billschreiber
Hello Dave, Before I get into waste management, I must first stress the importance of checking with your local regulating agencies. Every area can be and usually is different. California regulations differ from Ohio and Ohio�s are different than Mu
Electronics Forum | Tue Dec 08 18:40:04 EST 1998 | Graham Naisbitt
Hi all, Only observation I would make is that it depends upon what you term as clean? Now isn't that an old thorny question. Care to comment? Regards Graham | Hey there Dave! | | We used to use a batch cleaner when we used water-clean paste.
winsouce.jpg)
