Electronics Forum | Thu Apr 07 10:39:36 EDT 2005 | geb
I have a BTU International VIP98 reflow oven, running WINCON Version 2.00C on Windows 98. The light tower only lights green when the oven reaches temperature, and the other colours never light up. Do you know how to set the other colour lights to tu
Electronics Forum | Mon Sep 29 11:33:01 EDT 2014 | bobpan
Check the ampifiers in the back of the machine. They should have a green led lit on them. If the light is out or a red led is lit then the amplifier is bad. good luck
Electronics Forum | Mon Aug 27 12:34:54 EDT 2007 | rgduval
Dave, I'd be skeptical too, with that response! I've got a Culligan DI system installed here, and it's got it's own resistivity test meter. When the light goes red, it's time to call and get my resin changed. It's worked out pretty well here. Ba
Electronics Forum | Wed Aug 07 16:33:08 EDT 2013 | rway
I did not see the histogram image (didn't scroll down). My point about the flat metal surfaces is they should have a large white total under top-light with red filter. You should be able to distinguish between the two (fillets and no fillets). I k
Electronics Forum | Mon Jan 21 07:01:02 EST 2013 | ericrr
I can not believe this, We get back from Summer holidays turn on the first machine Juki KE750L goes to do a home and before the head moves, Error notice: rear feeder rise error, I go around the back, nothing out of place. but notice the receiver end
Electronics Forum | Fri Apr 08 05:22:47 EDT 2005 | Bored
The light events are: Red - Alarm - Indicates that an alarm exists.This also occurs when the emergency power stop button has been used to stop the belt and turn off heater power. Orange - Alert - Indicates that an alert condition exists. Green - R
Electronics Forum | Wed Sep 05 02:05:47 EDT 2007 | jepoy
What are the status of the LEDs? Are these LEDs lighted up in RED? If so, the harddrive and the sub are disabled. You can enable these if you have the system disc. Insert the system disc, then, $ sign will appear. Type hdstat. This will display the s
Electronics Forum | Fri Oct 29 11:59:35 EDT 2010 | rway
We currently have two YTV-M1 inline-systems from YesTech. I have been using them for around 3 years now. They are descent machines. If you decide to go with YesTech, go for the F1 system. This will give you the ability to upgrade with side camera
Electronics Forum | Tue Jan 05 17:12:20 EST 2021 | greezmky
Before our holiday shutdown an experienced party came in and showed me the PAM process on the IP-3. We made some adjustments, and all was well. Yesterday I found that we may have accidentally mixed up some nozzles, so I verified where each should go
Electronics Forum | Thu Apr 11 21:20:04 EDT 2013 | dman97
Hello. I am having a problem with a CP3 machine. This machine decides every so often to kill 24v power to its self. At first I thought it was a bad 24V power supply, but I swapped it out and it still decides to occasionally kill its self. I also re
.png)
