Electronics Forum | Thu Dec 28 18:59:14 EST 2023 | triplettx3
lead o matic is one we use for trimming leads after wave solder
Electronics Forum | Sat Mar 30 10:50:38 EST 2002 | stefwitt
Some earlier machines with mechanical component alignment could be bought with electrical test options ( Mydata, Siemens o.a.). This is, to my knowledge, the only method to identify chip components prior placement. The downside was a high reject rat
Electronics Forum | Fri Mar 31 16:06:58 EST 2006 | GS
I think this can be of help when dialing with setting up feeders for product prototyping, where often we have to dial with a short quantity of components (often pieces of carrier tape w/o tape and cover leader) just enough to run (if lucky) those few
Electronics Forum | Thu Apr 22 11:11:44 EDT 1999 | Jimmy Strain
| To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | Thankyou. | What size? An 8x4 is going to index a lot more times than 32x
Electronics Forum | Fri Feb 06 09:11:40 EST 2004 | stefwitt
Hi Pete, thank you for your positive feed-back. I was told by a carrier tape vendor, that the tape can�t be re-used for heat sealing. I made some tests myself and found, that if you are going to use exactly the same seam, the cover tape came off quit
Electronics Forum | Fri Apr 23 00:50:06 EDT 1999 | KEVIN SIMPSON
| | To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | | | Thankyou. | | | What size? An 8x4 is going to index a lot more time
Electronics Forum | Sat Jul 17 15:22:17 EDT 2004 | rohman23
Thanks for all the responses. I do agree with what was said, and can certainly see reasons not to try. I'll write a little more about what we do. We are a defense contractor, and as I mentioned very high mix, low volume. We only have 1 SMT line.
Electronics Forum | Thu May 09 17:07:56 EDT 2002 | davef
Troubles, troubles, troubles. If it weren�t for bad luck, I wouldn't no luck at all, eh? Tough business. Comments on your trouble are: * On machine vision errors from less than ideal capacitors: This is life. Reprogram your machine to either wid
Electronics Forum | Thu Jan 19 15:21:54 EST 2006 | GS
my experience: End '80 beg '90 we use a solution like that. Along the assembly lines, next to P&P machines we use to get dry cabinets (cheap and simple cabinet) where to put inside of SMDs (reel & trays once out of MBB ) during the waiting time from
Electronics Forum | Mon Sep 21 21:21:32 EDT 1998 | Steve Gregory
| am working on the design of a showboard to demonstrate our | assembly capabilities. we are working with double sided assemblies involving BGAs and CSPs. could someone suggest | types of BGAs/ CSPs (type, name, I/O, etc)that would be a challenge t
