Electronics Forum | Tue Jun 13 12:45:22 EDT 2000 | Peter Field
Help!!! We are using Fuji CP6 machines. The nozzles use those gloss yellow (sort of fluorescent) disks to provide contrast between the component and nozzle for centring. My operators keep damaging the disks causing the machines to need recalibratio
Electronics Forum | Tue Jun 13 14:52:12 EDT 2000 | Jason
Dear Mr. Fields, SMT Parts, USA (San Jose, CA) supplies the light dispertion disk for the CP6 nozzles. Call Mr. David Lombard at 1-831-477-1518 Hope this helps. Jason Robotham Tekmart
Electronics Forum | Mon Jun 19 14:14:12 EDT 2000 | pr
SMTRESEARCH.COM OR WPSALES are also options. There are lots of them out there who will supply just the discs, new nozzles, or do retips on your nozzles (cheaper) and all I've dealt with are cheaper than Fuji. As Kevin says your disc's need to be cons
Electronics Forum | Thu Jun 15 14:20:21 EDT 2000 | Kevin Simpson
Hi Peter, The Disk you are refering to can be outsourced from several different vendors. The thing to be careful with is getting a consistant colored disk. You don't want to have etc... some dull/bright..etc. We have found one local vendor we use.
Electronics Forum | Wed Mar 13 14:17:03 EST 2002 | dougt
Are these sensors the reflective type? Maybe when the board is unclamped and it goes over the sensor it is seen, and then when it is clamped (raised) it is now out of the range the sensor was set for. That should be easy to adjust. A problem I've
Electronics Forum | Thu Aug 24 13:36:07 EDT 2000 | Dr. Ning-Cheng Lee
Regarding the boiling point, MSDS may have some infomation reflecting that. Other description such as long stencil life and long tack time may also reflect. Wetting rate typically is not stated in product data sheet. You will need to determine it y
Electronics Forum | Tue May 20 15:35:36 EDT 2003 | kictech
How are you attaching your thermocouples? When using HT solder, the solder/TC surface of the joint can be reflective. This condition coupled with the IR can give you false temperature data since some of the heat is reflected away from the TC. Le
Electronics Forum | Thu Nov 22 09:14:06 EST 2007 | paulallan
Does anyone have any experience in point to point laser soldering and laser light reflecting off of SMT component 'J' leads down on to the laminate. This appears to be a random situation we cannot understand nor control.
Electronics Forum | Fri Apr 16 23:33:41 EDT 2010 | isd_jwendell
If you are trying for a nice reflective surface you will get a white with better spectral reflection if you paint with an appropriate formula after the board is soldered.
Electronics Forum | Thu Nov 14 12:11:00 EST 2002 | V.RAMANAND KINI
I am looking for a reflective coating on PCB. I have designed a PCB with SMT type side LEDs and Top LEDs. The light from these LEDs fall on to a lens profile on top of these and get mangnified and reaches the dashboard instrument's pointers. I tried
