Electronics Forum | Fri Aug 27 10:25:52 EDT 1999 | Matthew Park
Is it feasible to have one type of board carriers to take boards thru 1) glue curing process for first side and 2)invert carriers with boards, and 3)reflowing second side, and 4) do manual stuffing of th components and 5) take them thru selective wav
Electronics Forum | Mon Nov 27 20:44:01 EST 2017 | cmchoue
Dear expert's, I want to find the carrier that can support SMT print,placement,reflow and size can adjust. (My production is Motherboard) Does anyone have experience on it?or any infromation or photo can reference? Thanks Best w
Electronics Forum | Wed Sep 01 13:58:10 EDT 1999 | Dave F
| Is it feasible to have one type of board carriers to take boards thru 1) glue curing process for first side and 2)invert carriers with boards, and 3)reflowing second side, and 4) do manual stuffing of th components and 5) take them thru selective w
Electronics Forum | Fri Sep 21 13:04:58 EDT 2007 | jmelson
Hello, Is anyone using an SMT pick&place machine to insert single contacts into PC boards? I have some boards that have 32 female contacts for 1mm pins, and 16 contacts for 0.5mm pins. I have been using Mill-Max for these contacts, getting the sma
Electronics Forum | Fri Apr 02 01:05:34 EST 2004 | Grant Petty
Hi, Thanks for the info. How clean can wave soldering get? We are looking at a carrier that masks off most of the board when we run it through the wave, so hopefully this works. Regards, Grant Blackmagic Design
Electronics Forum | Fri Apr 02 01:10:01 EST 2004 | Grant Petty
Hi, We tried that, as the Soltec has a spray fluxer that can flux just the connector part of the board, however we get really heavy solder deposits on the rest of the board that has no flux sprayed on it, so we seem to need to coat the entire board.
Electronics Forum | Sat Oct 10 04:58:18 EDT 1998 | Tony B
| *Reply to: ericr@nj.tanon.com | | Without going into a lengthy explaination {at this time}, has anyone experimented, tested, evaluate, and/or 'perfected' an SMT double-side reflow process. Presently I'm using a Kester R593 OA (water soluble) Sn63/
Electronics Forum | Sun May 23 07:13:56 EDT 1999 | Scott Cook
| Has anyone had any experience or data using vibration during the reflow process. | We introduced a vibration device attached to the fixed rail on a Vitronics reflow oven. The reason was to prevent skewing on large PLCC devices. The process worked v
Electronics Forum | Mon Oct 31 13:01:58 EDT 2022 | emeto
It travels on the SMT carrier bent through all he process.
Electronics Forum | Wed Oct 26 14:28:12 EDT 2022 | emeto
Hello colleagues, I have a very long flex assembly that I run on a SMT carrier by bending assembly in the middle. This crates a curve after reflow, which I want to get rid if. Any ideas.
winsouce.jpg)
