Electronics Forum | Tue Nov 07 06:36:39 EST 2023 | ravikumargv
Dear All. Good day.. We have one Omniexcel dual conveyor reflow and recently we had PC got gone bad and now we replaced new mother board and hard disk, but we don't have the previous PC backup, now we need the software. kindly help us to share the
Electronics Forum | Fri Nov 17 03:41:38 EST 2023 | ravikumargv
Dear All, Any update for the below request. Please do the needful as soon as possible
Electronics Forum | Fri Apr 12 16:30:21 EDT 2002 | stepheno
If you are going to wavesolder the board after SMT you will have to epoxy the parts on instead of paste/reflow. I used to work for a company that squeeged it on. You will have to research component layout guidelines if you do want to wavesolder. If
Electronics Forum | Thu Apr 11 12:10:14 EDT 2002 | jax
Different Solder types are not needed. Surface tension will hold most. Plenty of info in the archives about reflow profiles, weight limitations, etc...
Electronics Forum | Wed Aug 09 12:22:11 EDT 2006 | Rob
You are going to struggle with that sort of connector - the only pin headers that seem to have widespread sucess are the dual inline ones with bent over j leads that sit on the board. They come with a plastic hat that allows vacuum pick up. However
Electronics Forum | Wed Feb 12 08:10:49 EST 2020 | majdi4
We can't do that because we are using dual ligne reflow oven..So the two sides of PCB are soldered with the same reflow profil.
Electronics Forum | Fri Feb 14 12:22:57 EST 2020 | etmpalletguy
OK, you can't glue, Pallet Guys pallets are out the door, dual line reflow prevents from any lower temp solder paste.... Do you have a 3D printer? Are there parts underneath the connector in question? Measure the PCB thickness, pint out a custom hold
Electronics Forum | Sat Sep 05 23:15:32 EDT 2009 | prasadz
We have successfully implemented this dual Process You can use any printer that supports Board width 500mm. SMT Dual Process Maximum PCB Width should be (500-20 / 2 ) = 240mm Max (PCB width )Printer support = 500mm Top width + Bottom width
