Electronics Forum | Mon Mar 05 16:16:08 EST 2007 | Mark
Hello, We are having issue with one of the customer board. This is 10 layer PCB FR4 with black solder mask. Coating Ni/Au. Soldering leadfree. We are using 7 zones air reflow oven (zones top&bottom). We have bed solder flowing for this boards. T
Electronics Forum | Mon Dec 27 18:44:14 EST 2004 | Mark
I am testing some BGA's (PBGA 30mm x 30mm) to evaluate the maximum ramp rate we can achieve in our reflow oven. Temperature is being measured at the body(top) of the component / not leads. After several trials (with various oven settings), the high
Electronics Forum | Wed Dec 20 07:16:16 EST 2017 | stephendo
I agree with Evtimov. What he didn't point out is that the surface tension of the solder would vastly overwhelm any force from air flow.
Electronics Forum | Wed Apr 10 05:29:08 EDT 2019 | SMTA-Tiberius
Hi there , We just got a 2000 litre Nitrogen tank for our Heller1809MKIII Reflow Oven , it has been installed and calibrated last week but now the Oxigen PPM doesn't drop below 3000 . Did anybody dealt with this issue before ?
Electronics Forum | Mon Apr 15 06:30:23 EDT 2019 | spoiltforchoice
Its not the max temperature that is the issue, its how much energy the oven is capable of transferring to the PCB inside the 4-6 minute window of a typical profile. In a conveyor oven this is achieved by having zones of different temperatures, but th
Electronics Forum | Thu Jan 08 16:43:43 EST 2004 | Dean
Unless your machine (internal) thermocouples are each calibrated and compensated no two machines will deliver eactly the same results. Here are your challenges: 1. Data acquisition equipment A-D converter errors 2. PCB measurement thermocouple (t
Electronics Forum | Tue Apr 11 11:47:56 EDT 2006 | amol_kane
Hi SMTnetters, I have a white residue coating all over my reflow oven innards (almost looks like white fungus). How can I absolutely be certain that it’s flux and not anything else?are there any tests available for this? I am planning to check the ov
Electronics Forum | Tue May 09 09:10:30 EDT 2006 | Chunks
Grease filters work well. They're cheap, easy to clean and come in all sizes. Will not reduce your air flow by much either.
Electronics Forum | Thu Jul 24 10:49:12 EDT 2008 | slthomas
100 CFM at each exhaust if you're using room air, 25 CFM/ea if you're using nitrogen (according to my manual...never used nitrogen myself) per their specified delivery rates.
Electronics Forum | Tue Mar 09 07:06:42 EST 1999 | Charles Stringer
| | | | I need to setup an oven to run with a nitrogen atmosphere for | | boards with BGA's, but our ovens do not have the optional atmosphere monitor and controller. Is there a good way to sample and control the atmosphere without the optional bui
winsouce.jpg)