Electronics Forum | Wed Jan 07 13:17:56 EST 2004 | James
We currently have 2 HVA 102 conceptronic reflow ovens. I ran 2 profiles on the 2 seperate machines. One of the oven ran 7 degrees lower than the other oven. I checked all the fans and they seem to running fine. I get no warning on the monitors.
Electronics Forum | Thu Apr 11 15:07:31 EDT 2019 | reckless
I also am a huge fan of Universal Machines for their reliability, capability and dependability. Very highly engineered machines. Only machine I hear better than them is Fuji. Apple and Motorola used Universal's extensively so it tells you how re
Electronics Forum | Thu Mar 28 20:40:35 EDT 2019 | sarason
I built myself a reflow oven using an off the shelf 29l fan forced oven with digital controls. I then fully insulated the cavity around it with kiln fibreglass, and added a metal infill at the back as the back of the oven was just a metal sheet. Anyw
Electronics Forum | Thu Jan 08 11:06:40 EST 2004 | russ
If I read this correctly you have two identical ovens that were setup the same ie zone temps, fan speeds etc... when you ran the same board through each of them one showed a lower board temp. Is this correct? Is the temp of the board 7 deg. lower t
Electronics Forum | Tue Jul 16 02:18:42 EDT 2019 | sy332366
Specifications : S-8800 Number Of Heating Zones :Up8/Bottom8 Dimension (L*W*H)mm: 5310x1353x1490 Dimension (L*W*H)mm: 5310x1353x1490 Number Of Heating Zones : Up8/Bottom8 Length Of Heating Zones : 3121mm Control System : PLC+Computer Transmission Age
Electronics Forum | Mon Jan 19 08:37:16 EST 2009 | lkpdsund
Hello all! We possess a speedline electrovert omniflo 7 reflow oven at my site. Last week we examined how the solder profile was affected by fan-speed and by providing the soldering process with compressed air(O2) or nitrogen(N2). We also ran the sa
Electronics Forum | Fri Jun 23 12:21:29 EDT 2017 | rgduval
I'm going to guess that you've tried Speedline with no success. They're awfully annoying about their older machines. Things to check: - Thermistor for the zone working properly? - Opto for the zone working correctly? - Heaters working correctly? -
Electronics Forum | Mon Sep 27 18:11:14 EDT 2021 | emeto
I did work with most of these brands have some personal preferences like anyone here.I will just say that ovens I worked with, make it for 5-10 years with not a single fan failure, so stay away from the models that give this kind of trouble. If we ar
Electronics Forum | Wed Feb 10 12:37:14 EST 2021 | dontfeedphils
In a past life we had "board catchers" who stood at the end of our two lines and caught the boards. They were also in charge of transporting the boards to wash and loading/unloading the wash as well. I was never a fan of this approach, bu
Electronics Forum | Mon Sep 27 20:14:37 EDT 2021 | cbeneat
For what it's worth, we have 5 Vitronics ovens. XPM2, 2+, 3I, 3M. Our Oldest is an XPM2-1030 as mentioned. We have never replaced a fan motor. We've been running it for 3 shifts for 16 years. A couple of the gearboxes for the conveyor width have been
winsouce.jpg)
