Electronics Forum: reflow probleme (Page 1 of 238)

Vibrating reflow

Electronics Forum | Wed Sep 17 07:39:13 EDT 2003 | davef

As we recall, they attached something like a placement vib head to the rails. The problem, as you stated, was isolating the board from the vibrating rails during cooling of the solder connection.

reflow oven

Electronics Forum | Mon May 24 17:32:18 EDT 2004 | pjc

Look to the no-Pb solderpaste mfr. specs for on-board temps. For example, Indium Corp. has a product that performs at on-board temps of 229C. Now, your BTU oven will handle this no problem, as will most modern ovens. Its all about thermal mass. Look

vacuum reflow

Electronics Forum | Fri May 14 16:49:17 EDT 2021 | winston_one

Agree with WiIIR and also can recommend to play with vaccum pump RPM . Slower vacuum increasing have help me to resolve one problem caused by the vacuum (it was solder splash from BGA balls, but the reason can be similar to your case). Also check i

Vibrating reflow

Electronics Forum | Wed Sep 17 12:30:09 EDT 2003 | russ

I can guarantee that vibrating ovens will be detrimental in double sided reflow for any of the larger parts. I find it interesting about BTU and there "vibrating" oven. I had a couple of these in the early days and they did indeed vibrate. However

Incomplete reflow

Electronics Forum | Fri Apr 04 18:16:43 EDT 2014 | garym4569

We are in the process of launching a new product and found reflow solder issue with one of the inductors. I have set oven profile to paste specifications. I just finished profiling with thermocouple under problem component. All other components ex

reflow oven

Electronics Forum | Mon May 24 16:45:44 EDT 2004 | Bob

BTU as well as most oven manufactuers have great products. If they fit what your looking for and can give you good support(preferably local) then you should not really see any quality problems with their products. With the oven max temperature of 300

Intrusive reflow

Electronics Forum | Mon Mar 26 08:52:19 EDT 2007 | realchunks

Hi J, Yes, we do too. Funny thing is I was just looking at this last Friday. We call it sharing the bottom of the barrel. Typically it's just Process Engineers stuck down here, but from time to time, Maintenance gets stuck down here too. When in

Mysterious reflow problem

Electronics Forum | Tue Sep 01 02:23:09 EDT 2009 | isd_jwendell

Have you profiled at the problem side of the part?

UBLOX Tim-4A reflow problem

Electronics Forum | Fri Dec 15 08:40:34 EST 2006 | aj

Straight ramp .

UBLOX Tim-4A reflow problem

Electronics Forum | Sun Dec 17 17:40:49 EST 2006 | darby

Thanks AJ, It is looking like a CTE issue.

  1 2 3 4 5 6 7 8 9 10 Next

reflow probleme searches for Companies, Equipment, Machines, Suppliers & Information

Best SMT Reflow Oven

World's Best Reflow Oven Customizable for Unique Applications
See Your 2024 IPC Certification Training Schedule for Eptac

Best Reflow Oven
Software for SMT

High Precision Fluid Dispensers