Electronics Forum | Fri Sep 21 10:44:34 EDT 2001 | slthomas
You can, and for small parts you probably won't see much difference between body temp. and lead temp. For QFPs or PLCCs there will be a much greater delta, though. I'd be more concerned with the small surface area you're making contact on (spherica
Electronics Forum | Mon Oct 18 12:55:47 EDT 2004 | marc
45 seconds from 230-245C. Check your paste material of choice for recomended profile peak temp and TAL. If you have not selected a lead free material check out the major paste suppliers on their lead free material offering and review the specs.
Electronics Forum | Mon Nov 08 11:00:53 EST 2004 | davef
It's possible your supplier has not thought through the results of their conversion to lead-free throughly. We'd expect something like: Reflow Parameters||Pb Assy||Pb Free Peak Temp.||235�C �5�C||255�C �5�C Time Within 5�C Peak Temp.||20 to 40 sec.|
Electronics Forum | Wed Aug 07 01:41:27 EDT 2019 | orbitcoms
Hi I am having trouble getting solder bridges on TQFP-100 (0.5mm pitch) components. The boards are pasted on semi-auto printer using laser-cut 0.12mm stencil and SN63 NC257-2 T4 paste. The components are placed using Samsung CP40LV and tghen reflow
Electronics Forum | Tue Sep 02 13:30:11 EDT 2008 | hermes
Try this. Basic reflow profile build up and explanation of its parts: ramp-up, soak or no soak, peak, cooling. Good starting point.
Electronics Forum | Tue Jul 28 09:15:49 EDT 1998 | Justin Medernach
| We are about to run our first BGA devices and would appreciate some confirmation on a few points. | First some details: | PCB & Device: | ============= | 1) 16 layer (4 power, 4 gnd, 8 signal) | 2) gold on nickel finish | 3) ceramic BGA with eutec
Electronics Forum | Tue Sep 09 12:05:44 EDT 2008 | tonyamenson
First and fore most is to find your paste manufacturer spec sheets. Read it over several times and let it all sink in. Then call them with questions as they want to keep your business so their engineers want to help you use their product. I assume y
Electronics Forum | Tue Jul 28 17:23:58 EDT 1998 | Robert Steltman
| | We are about to run our first BGA devices and would appreciate some confirmation on a few points. | | First some details: | | PCB & Device: | | ============= | | 1) 16 layer (4 power, 4 gnd, 8 signal) | | 2) gold on nickel finish | | 3) ceramic
Electronics Forum | Wed Apr 21 17:27:27 EDT 2004 | russ
We always use the regular production reflow profile when we use this method. Since you don't want to do that, All that is required is to ramp the part up to temp to get the balls to melt. If you don't exceed 2C per sec. in a ramp you will be fine.
Electronics Forum | Tue Aug 22 21:00:39 EDT 2006 | davef
National says: [ http://www.national.com/packaging/llp/faq.html#faq_manu ] Manufacturing FAQ's Are there any precautions that need to be taken with the LLP package? It is critical to follow National�s guidelines for successful surface moun
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
winsouce.jpg)
.gif)