Electronics Forum | Wed May 12 16:31:25 EDT 2004 | Mark @ SolderStar
In answer to your questions. (1) pls can any body throw some light on the reflow profiling? Reflow profiling is the process of confirming that you PCB's that pass through your reflow oven are produced within specifications provided by solder paste
Electronics Forum | Thu Jan 20 17:14:39 EST 2005 | jbrower
Today, I have just finished evaluating Kester's EM907 (SAC305)lead free solder paste and found that for our applications it performs as expected. End result that I am encouraged with the results that we got. The equipment that I used: An SMT2020 to
Electronics Forum | Tue Apr 09 08:44:43 EDT 2002 | davef
Read IPC-7530 "Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)". There is no advantage in dropping off much faster than 4�C/sec. In fact, you risk fracturing your newly formed solder connections due to board warping
Electronics Forum | Tue Apr 09 07:41:08 EDT 2002 | johnw
Craig, it depend's n what you want to look at. In term's of te gran structure of the solder jont that's formed when the joint is cooling so you'd want to monitor the temperature drop from the peak or say 215dg C for ref down to probably about 150 an
Electronics Forum | Fri Feb 10 12:21:44 EST 2006 | Cal Kolokoy
DaveF is correct in saying that TAL is not the best metric to use in reflow soldering. That is why paste manufacturers give such a wide range; typically 30 to 120 seconds. The peak temperature is more important, especially in the mixed Pb and Pb-F
Electronics Forum | Wed Apr 06 22:59:02 EDT 2005 | smt_rookie
It is the solder ball that's usually encountered in a reflow process. It's just that, the paste did not wet well along the connector pins. Before reflow, the paste is actually at the tip of the connector, and stayed there and never went up to fill th
Electronics Forum | Wed Apr 06 11:10:47 EDT 2005 | smt_rookie
We process a double-side reflow board (10 ups). Chips and IC's on the bottom side while chips, IC's plus thru-hole connectors and IC sockets on top side (bottom side first then top side reflow). In the past, we were not encountering any soldering pro
Electronics Forum | Tue Feb 11 13:41:54 EST 2003 | Stephen
How are you doing things now? I'm trying to picture a place going from no reflow oven to a reflow oven without also getting a screen printer at the same time. Are you now handsoldering parts on? With these batchs you plan on doing are you going to
Electronics Forum | Mon Jul 12 10:21:06 EDT 1999 | Earl Moon
| I need some advice concerning reflow of a BGA-292. Since I am not ready to change my entire process to no-clean, I decided to place the lone BGA-292 on a proto run using our BGA re-work station. The pcb is a moderately dense, single-sided, 8-laye
Electronics Forum | Thu Aug 24 15:37:50 EDT 2006 | Chunks
Hi Any, This is from an earlies thread "Solder Ball After Reflow Process". Date: August 16, 2006 01:52 PM Author: Russ Subject: Solder Ball After Reflow Process Oven settings are meaningless here. What does the board see? It is the paste we a