Electronics Forum | Mon Oct 21 18:24:08 EDT 2019 | dougt
I haven't thought about this in a while, wrote up something on how this works here years ago. I think I remember..... As you know the first machine finishes the board and is "ready to send". It tells the second machine this by connecting pins 3 &
Electronics Forum | Tue Jul 25 20:36:58 EDT 2000 | Dave F
Sal: When western companies first started studying Japanese companies, they found the Japanese using a technique called "poka-yoke." It means mistake-proofing. In this, the designer specifies parts and assemblies so that they can be assembled one
Electronics Forum | Sun Dec 19 08:05:14 EST 1999 | Dave F
Clarissa: We've all done thing on a limited basis, especially on prototype boards, but this doesn't sound like a limited basis, or prototype boards. (And may be I reading too much into this, we all know the frailities of conversing like this.) Thi
Electronics Forum | Tue Jul 07 12:52:02 EDT 1998 | Upinder Singh
Thanks Earl. Well following is the data regarding the product. 1. The panel consists of 21 boards. 2. The surface I mentioned would have 3 SMds and 1 T/hole connector. 3. PCB thickness is 55 mils and the width of the hole on the PCB for the thru-
Electronics Forum | Mon Dec 02 09:47:54 EST 2002 | davef
Most modern spec do not distinguish between process methods. So, there is no allowance "if you are using bla bla bla method, you should see ... . But if you are using bla bla de bla method, ignore that and look for ... ." Most specifications requi
Electronics Forum | Thu Nov 11 18:36:29 EST 2004 | valuems
Hello We have been working on the MPM's for over 11 years now. And we have never had any trouble with that circuit, just goes to show you. If you have one of the old, old manuals you will find a lot of errors. They corrected them as they went. We
Electronics Forum | Thu Nov 18 13:44:50 EST 2004 | ehess
I know this is not a SMT machine, but I thought I might find someone on here who could help me. We have an old Universal 6348A Radial lead inserter. The problem we are having is the chain will stop, periodically, before the chain stop status wheel
Electronics Forum | Thu Nov 18 13:45:20 EST 2004 | ehess
I know this is not a SMT machine, but I thought I might find someone on here who could help me. We have an old Universal 6348A Radial lead inserter. The problem we are having is the chain will stop, periodically, before the chain stop status wheel
Electronics Forum | Thu Nov 18 13:47:25 EST 2004 | ehess
I know this is not a SMT machine, but I thought I might find someone on here who could help me. We have an old Universal 6348A Radial lead inserter. The problem we are having is the chain will stop, periodically, before the chain stop status wheel
Electronics Forum | Thu Nov 18 13:52:51 EST 2004 | ehess
I know this is not a SMT machine, but I thought I might find someone on here who could help me. We have an old Universal 6348A Radial lead inserter. The problem we are having is the chain will stop, periodically, before the chain stop status wheel ma
