Electronics Forum | Sat Sep 26 14:54:52 EDT 2015 | ercdave1
Hello, just a quick update on this issue. I disabled head 2 on beam 2 which was the second head I worked on, and left only active the head that I had work with first and ran dry cycle with. after disabling the head 2, the machine zeroed with no pr
Electronics Forum | Fri Sep 25 20:11:58 EDT 2015 | ercdave1
Thank you for taking the time to read this post. I hope I can get some help since I am at the point where I don't know what to do. I have a Q block Universal GSM2 having some issues. I am getting an error message that reads. "spindles Not seen for
Electronics Forum | Thu Jan 31 04:19:54 EST 2019 | mst3000
Thanks. Full maintenance has been carried out and the head was removed. No traces of solder paste was noted.
Electronics Forum | Wed Jan 12 09:47:14 EST 2011 | gantry
Definitely agree with JMW, most machines you find will already have the upward looking camera unless it was the first (or second) head in a multi-head system. I would not look at a C-series without the upward looking camera
Electronics Forum | Tue Dec 02 06:44:59 EST 2014 | cbeneat
Here's what I found online, 602 Placement accuracy ±40µm/chip (Cpk1) If you need the flexibility to switch from ultrahigh-speed placement to multi-functionality on site, the CM402 high-speed interchangeable platform, modular placement machine is the
Electronics Forum | Tue Apr 09 22:32:05 EDT 2013 | jeffr
There is no easy way... but this is how I do it.. Origin the R axis, losen the idler bearings on the belt, remove the C clips at the top of the heads, lift up and remove the spindle assemblies being careful not to lose the 2 balls in the side of the
Electronics Forum | Mon Nov 19 11:02:40 EST 2018 | robl
The old YV-112 equates to the old Philips Comet, which had 16 heads. It could only go down to 0603 imperial though. Here it is in it's early 90's glory: https://tools.adoptsmt.com/equipment/?id=14777 Do I think the YSM40R will hit 200K per hour? p
Electronics Forum | Tue Jun 19 10:14:10 EDT 2007 | realchunks
A faster printer..... at less than 14 seconds? I don't think you'll find one. Easier and cheaper to multi-up the board. Another idea is to print a head of time and use magazines to store boards. Most adhesives have huge board life times. An in
Electronics Forum | Sat Apr 29 12:18:07 EDT 2023 | poly
I have finally got a calibration kit for my single beam multi function Genesis. Calibration finishes successfully, I then attempt to pick a part with the 7 spindle head and it gives me a collision error. The error occurs even when I don't have a no
Electronics Forum | Wed Aug 15 16:25:52 EDT 2018 | ceharperc1
Anyone with a lot of printing experience, especially in proflow process? I am seeing a lot of voids in the bottom of the head after running. Will run with multiple good assemblies with paste volume being between 60% and 150%, out of no where we wil
