Electronics Forum | Wed Mar 03 15:48:31 EST 1999 | Timothy Loose
What do you recommend for engineering lab SMT tools? We'll be doing general PCB assembly and repair, fine pitch and others.
Electronics Forum | Thu Jun 02 11:08:18 EDT 2005 | Interested in The repairable tool
If you have some tool which can be convenient for repairing component mounted with lead free process, please email to me, I am interested in them very much. In my opinion, to repair a SMD component is not difficult. The most important thing is how
Electronics Forum | Mon Apr 17 19:44:20 EDT 2000 | Dave F
Ashok: Well, your customer probably has a good reason for wanting you to send them boards without holes in the solder mask. What is their goal for the mask capabilities after you get do reworking the boards? * Cosmetic surface coat? * Performance t
Electronics Forum | Wed Jun 24 14:31:36 EDT 2020 | kumarb
Thank you so much for your comments. It sounds very logical as the probes are indeed the original along with the rest of the insides of this machine (270 hours of on time). The entire module is offset by 50-75 degrees cooler so suspecting that the pe
Electronics Forum | Fri Jul 13 08:25:03 EDT 2001 | caldon
You will need to prepare the component and site for rework. Using solder wick remove the solder from the pad site and the component balls. You can also use a heated Vacuum desoldering tool. To reball we have been using Winslow Automation reballing ki
Electronics Forum | Sat Jul 14 08:56:39 EDT 2001 | davef
Cal is right on target. I'll expand on his points. BGA solder perform suppliers: * Winslow Automation: http://www.winslowautomation.com/ * Galahad 12784 Tulipwood Circle Boca Raton, FL 33428 561-487-0271 galahad.inc@usa.netemail: BGAKIT@concentric
Electronics Forum | Wed Jun 24 21:58:16 EDT 2020 | kumarb
Thanks Rob. They want to sell us a new TDM which does not sound correct as the entire TDM is with an offset. Logic is making us believe that the calibrated data is stored inside the onboard microwire eeprom. Do not know the format of these expected v
Electronics Forum | Fri Apr 08 05:11:12 EDT 2011 | diputechem
you can use Rema tiptop's repair kit. if you think rema brand is very expensive. can use these tools made in China. The conveyor belt repair tools made by Dipute Co.,Ltd. is with good quality,low price,they have good reputation in Asia,and gained hi
Electronics Forum | Thu Dec 17 12:23:46 EST 2009 | leemeyer
Take a look at http://www.habasit.com. They supply tooling to make these belts. I found it more cost effective to have the belts made for me at a local belt supply buisiness, the tooling is expensive.
Electronics Forum | Fri May 27 12:09:59 EDT 2005 | saragorcos
You do want to be very careful with potentially entrapped organic materials as they are prone to causing electrical leakage failures particularly around sensitive devices. There is a new clenliness testing tool available that tests a localized area
