Electronics Forum | Fri Mar 29 20:07:50 EDT 2019 | sarason
I measured the temperature rise when I built the unit and it has a nice linear rise in temperature over the 3 minutes. I have used the Quikees before. The galcon gas stinks and must be evacuated. The galcon is expensive. The galcon is a perflourocar
Electronics Forum | Mon Apr 15 10:32:23 EDT 2019 | slthomas
Just a comment on the Heller 1500. We had 3 at a previous workplace where we never made the Pb-free transition (this was early 2000's). The ovens we had were not designed for and were never used for Pb-free processing yet every one of them had all o
Electronics Forum | Tue Aug 10 15:42:20 EDT 2010 | flipit
I had 2 Contact 3AV and 2 Contact 3Z machines. Basically the same as 3AVX machines. Both models are good machines. They are perfect for small production and even medium production size lots if you have multiple machines. Super easy to operate and
Electronics Forum | Wed Sep 30 20:35:51 EDT 2020 | erici
Hi all, was wondering if you have any ideas on how to correct the problem we are encountering with our S25 machine. The machine is giving an X-axis counting error at gantry 1. I replaced the x-axis linear reader and the linear scale as well, but st
Electronics Forum | Thu Sep 23 11:37:43 EDT 2010 | flipit
I had 4 of these machines. They are good machines but I have seen this error often. Is the problem only on one head L or R? If so swap electronics L to R and see if it follows. You can even swap the Y motors. The items that could cause this prob
Electronics Forum | Thu Feb 14 22:19:05 EST 2008 | ashley
hello Keith, the problem may be related to a faulty / dirty linear scale. kindly check on the yellow strip along the X axis. clean & clear the glass linear scale of debris & grease. for Fuji support & spare parts, please write to :- apexservice@
Electronics Forum | Wed Jul 09 12:00:25 EDT 2014 | bobpan
You have a rather old machine that you are running....now realizing this you need to check some things. 1. Clean the scales in the x and y direction. On some of the encoders there is an led to see if its reading correctly....Usually it turns green b
Electronics Forum | Mon Apr 11 06:54:03 EDT 2011 | mosborne1
Wipe off your linear scales and clean your quadalign lense.
Electronics Forum | Sat Oct 13 10:20:20 EDT 2018 | reckless
Wouldn't the VRM linear motors need to be replaced eventually? How long do they generally last on the genesis? Replacing a ball and screw is not cost prohibitive but the linear motors sounds like it would be. Wouldn't that be the life of a genesis
Electronics Forum | Mon Oct 10 22:56:13 EDT 2005 | Alan.
Dave, it could be that you have some dirt or grease on the linear scale for the X-axis. Try getting into the rubber shield with a soft brush or perhaps a spray. Threebond Super Cleaner 6602 is very good for this purpose as it cleans and dries w
