Electronics Forum | Tue Oct 05 20:37:44 EDT 2004 | davef
Now, now Fastek let's not resort to name calling. B-)
Electronics Forum | Wed Aug 06 14:15:46 EDT 2008 | dphilbrick
If everything else solders good it has to be the part, Test solderability, insure placement force is correct and as a last resort bake the part.
Electronics Forum | Fri Sep 03 08:19:44 EDT 2010 | rway
Agreed, but his fiducials aren't working so he may have to resort to something a little bigger that returns a more consistent pattern. You are correct, this will provide less accuracy than his fiducials but will save him the expense of cleaning his
Electronics Forum | Tue Aug 09 10:53:10 EDT 2005 | DannyJ
Hi Dave, Thanks for the suggestions. Those did cross our mind as an option, and kind of saving that for a last resort. We just hope we have enough left for them to do an analysis and come up with the right solution. We may have found a supplier
Electronics Forum | Mon Dec 18 23:24:50 EST 2006 | grantp
Hi, Yes, I would hate to resort to cleaning, but the product must be clean. We have been using palettes to keep most of the flux off the PCB, but there is still residue around the connectors. Does anyone suggest a good no clean flux to use with le
Electronics Forum | Fri Feb 01 17:36:35 EST 2008 | severs
Thanks John, You built smart batch I/R oven from a consumer toaster oven and that sounds pretty cool and cheap too. I'm hoping that we don't have to resort to all of that to get what we need... although I have been toying around with the idea of buil
Electronics Forum | Wed Oct 15 15:40:21 EDT 2008 | stepheniii
255 shuts it off, but if I remember correctly 254 still uses vision but passes almost everything? You might want to give 254 a try before resorting to 255. I believe 254 will still correct some pickup offsets. And iirc 255 isn't in the manual but so
Electronics Forum | Fri Sep 06 12:34:00 EDT 2013 | bobpan
Your firmware is so old that the problem is not in the mod codes anyways. You have a problem with the cyberoptics head. If its not working at all, i would remove the lens assy on the front side where the cable plugs in and blow out the unit. Maybe if
Electronics Forum | Wed Mar 25 14:46:08 EDT 2020 | stephendo
What about designators? Using gerbers to program a pnp machine was always a last resort to be done only after much complaining and begging for proper CAD data. Back in the day I used UniCAM to program a mydata. After getting it figured out it was eas
Electronics Forum | Wed May 02 12:07:00 EDT 2001 | mparker
I was a bit amused the way you "tanked" that dip John. I mean you skewered him without benefit of remoulade, that puppy was tarred and feathered, chopped, chromed, toasted!!! I was a bit surprised that you chose to get back into the thread, it didn't