Electronics Forum | Mon Mar 20 06:21:42 EST 2006 | AR
Have a problem with Omniflo 5 (-97 vintage) pin chain conveyor. Occasionally the conveyor stops for a second or two, then makes a slight jerk, then stops again, makes a jerk etc. Then suddenly the problem goes away only to return next day (we switch
Electronics Forum | Tue Sep 14 17:49:36 EDT 2010 | g2garyg2
The problem with the Sunsda units is that they use a special circuit board, not PLC and Chinese software for programming, so getting into the program to find out what is going on is a problem. Have you replaced the SMEMA cable? I have seen bad ones.
Electronics Forum | Mon Nov 14 00:13:55 EST 2011 | tpappano
Hi Jeff, I pulled the proms from both machines, copied to disk, re-burned the the old versions with the newer and reinstalled. The ram became scrambled in the upgraded unit on startup, but I did a full restore through the serial port and unit #2 got
Electronics Forum | Sun Apr 15 20:58:17 EDT 2007 | darby
PCB > Origin > O* > Skip = No Data In > PCB > Mount > M* > Skip = No Data In > System > Parameter > Position > Waiting Pnt Check that the waiting point is not set at such a co-ordinate that the PCB sensor is seeing the gantry. The pcb sensor also h
Electronics Forum | Wed Mar 01 07:48:33 EST 2017 | coryhayes89
I have an older Flexlink F1700 that I am having issues with and am hoping someone might have a fix for it. The issue is that the machine will initialize when you turn it on, meaning the belts will spin. However, it never returns to its 'home' posit
Electronics Forum | Fri Jul 12 12:00:13 EDT 2024 | jdengler
How would you print 2 different products in the same line? This seems to me to be the sticking point on that approach. I don't see enough benefit of dual lane to justify the added expense. Remember you will need to have dual lane conveyors possibl
Electronics Forum | Thu Jun 25 10:32:51 EDT 1998 | Gary Simbulan
Alright gentlemen and ladies of the forum, I again seek knowlage on what is probably a well known fact. I have spent a good part of the morning with various IPC standards and weighty tomes such as the Electronic Packaging and Interconnection Handboo
Electronics Forum | Wed Sep 18 15:43:33 EDT 2002 | dougt
Someone that makes conveyors just called me to argue about a smema problem we had with his conveyor and our machine. He caught me off guard and I wasn't the person that handled the problem so I stumbled through this initial conversation. Now that I
Electronics Forum | Tue Sep 29 11:54:28 EDT 2009 | mikesewell
Here's a stab at it... Decide on how much overlap you need for your spray pattern and calculate your effective spray width. 4" spray with 25% overlap would be 3". Keep your units the same (unit lengths and unit length per unit time). Assumes your
Electronics Forum | Tue May 19 08:48:05 EDT 1998 | Aric Parr
| | I am running boards with gold fingers on a pallet for | | masking purposes. The pallets worked fine for a while | | but know the gold fingers are getting solder on them. We | | have tried everythin: new pallets, cleaning the pallet | | and boa
winsouce.jpg)
