Electronics Forum | Fri Jun 06 06:11:18 EDT 2014 | paulg
I have a large monoblock ceramic filter on a PTFE based pcb material. The filter has a metal casing soldered onto the ceramic filter. I am concerned that if the heating rate is to rapid, then thermal shock / differential expansion could cause the fil
Electronics Forum | Mon Jun 09 11:11:57 EDT 2014 | cyber_wolf
What does the technical data sheet for the component recommend for reflow profile ? Can you post a photo of the component ?
Electronics Forum | Thu May 24 07:09:04 EDT 2007 | aj
Any advice with using this type of PCB material would be welcome. aj...
Electronics Forum | Fri May 25 08:06:19 EDT 2007 | davef
Soldering PTFE boards * Exposure to the high temperatures needed for solder reflow poses no problem of loss of peel strength since the exposure times are relatively short. * There are many different types of PTFE based products that may perform diff
Electronics Forum | Tue Apr 17 09:38:04 EDT 2001 | CAL
With some help from our good Friends at Agilent Technologies our RF Lab includes testing up to 100GHz. Equipment includes Vector network analyzer, signal analyzer, dual channel power meter, noise filter meter, advanced impedance analyzer (including
Electronics Forum | Thu Feb 12 16:59:11 EST 2015 | emjasaph
We have a board that has an RF shield on one side and ceramic capacitors on the other side. The side with the capacitors is reflowed first, then the other side is reflowed. We have been experiencing cracked capacitors in these boards. My guess is tha
Electronics Forum | Tue Dec 22 09:14:24 EST 2020 | dimamalin
Hello guy's, I need a advise to desoldering smd filter with big soldering square from GOLD-ceramic surface with rework station ERSA IR650. TC-SENSOR not reading temperature ,because board work like radiator. IRS- SENSOR have a problem with gold
Electronics Forum | Fri Oct 22 11:37:38 EDT 1999 | Brett Gordon
Working DFM SMT issues with respect to a client's artwork together with a heavily modified solder stencil, I was able to reduce 0402 tombstoning from 80% across the board to 3%. I winged the aperture reductions, but are there any "rules" or guidelin
Electronics Forum | Fri Jan 10 09:30:55 EST 2003 | russ
Does anyone know what the voltage ratings on ceramic caps is related to? Would it be safe to use a 50V cap instead of 25V for .01uF X7R bypass/filter caps? Thanks Russ
Electronics Forum | Tue Sep 27 15:57:43 EDT 2005 | stepheniii
Ceramic caps are denser than most other components and I"ve found the tops can be slightly rounded. You may want to slow down the turret speed for some parts. Do you ever get a location where there should be a part but there is not? If the part fly