Electronics Forum | Tue Jul 26 11:02:30 EDT 2005 | dphilbrick
I have a single sided PCB that contains 4 RF connectors that will require conformal coating. Sounds easy, well the RF connector is .080 in diameter and stands a whole .050 in height. The sub-straight that the barrel sits on is about .020 thick. I don
Electronics Forum | Wed Oct 07 15:46:36 EDT 2020 | tamasmagyar
Hi Hearse, I currently use a MY600, with a AG Ejector which can place dots between 0.33 and 0.52 mm. The differences for a MY600 with placing small dots is down to ejector and paste. To be able to place dots as small as 0.25 mm, you would need an
Electronics Forum | Wed Aug 08 15:31:30 EDT 2001 | johnw
Hi folk's, I'm looking for some hint's here. Got a board from the customner that is ceramic, and it's 2.2mm thick. I've got a couple of RF connectors that I need to solder, problem is I can't get any flow up the PTH's. The pin's are gold on the conn
Electronics Forum | Fri Mar 30 11:04:24 EST 2001 | genny
We are already using ICT on the PCB, which should catch most missing components, also components installed backwards, or the wrong value(to a point - we do RF so we have lots of very small value caps and inductors which can't be measured), and in som
1 |