Electronics Forum | Fri Sep 15 10:00:15 EDT 2006 | Joe C.
Hello Everyone, Does anyone have any experience with an SMT right angle LED from Panasonic, part number LNJ123W8PRZ. In our experience the pattern design from the vendor was not very effective (the part swam around on the pads & flipped backwards dur
Electronics Forum | Fri Jul 21 10:10:43 EDT 2006 | russ
these components generally have flattened through hole leads that have been formed for SMT, I have found that they do not sit well on PCBs. They rock, the leads are sometimes angled, etc.... In addition to Robs good advice you may want to just be sur
Electronics Forum | Tue Aug 14 16:26:21 EDT 2007 | slthomas
So it's a C-n-C clearance issue? Could you go with the other cutnclinch unit...which ever you have, get the other one (one's right angled, one's offset at 45�)? Yeah, I know, they're not cheap. Other than that, hand place some of the SMT in chip bon
Electronics Forum | Wed Apr 06 11:58:02 EDT 2005 | patrickbruneel
Hi SMT Engr With a double-header connector do you mean Double Level Right Angled Header Connector. If so there is a big difference in heat sinking capacity between the two rows, as where the pins of the top connector absorbes twice as much heat as t
Electronics Forum | Wed Jul 09 16:05:12 EDT 2008 | bkreiman
We are using a right-angle SMT power connector on a board. The connector has 4 leads and two board alignment pins. The layout for the board is such that 1 of the leads is not used and the pad for the lead is not connected to anything, not even grou
Electronics Forum | Thu Feb 23 10:49:38 EST 2006 | slthomas
Defining failure modes will help determine what you need to quantify in all processes. Personally I wouldn't pursue the DoE angle (varying setup parameters to determine robustness). 1)How about % pad coverage, paste thickness, and accuracy? Define w
Electronics Forum | Thu Feb 27 15:13:35 EST 2003 | stockley
Oh dear, I tried not to respond but i couldn't help myself. Stop me if I go off into the woods. My guess, Chris, based on your fleeting reference to GF files, is that your SMT machines are Siemens Siplace. If this is so then package orientation def
Electronics Forum | Wed Oct 28 02:03:18 EST 1998 | Erhard Hofmann
| | | We currently using the Panasert SMT machine where PCB flow | | | direction were from right to left, & we are planning to move | | | in the FUJI -CP3 & CP4-2 in line where standard PCB | | | flow direction were left to right. | | | Any comment o
Electronics Forum | Fri Aug 28 03:03:00 EDT 2015 | grimus
Thank you all for your advice. You are right this is two sides board, and dropped parts are on bottom side, and it is refered just to very light switches. I am using same temperature setup for top and bottom. What is interesting I am manufacturing t
Electronics Forum | Fri Apr 27 08:58:49 EDT 2007 | ck_the_flip
There are several pallet manufacturers, Ascentec Engineering, Pentagon EMS, and S&P Engineering - to name a few - that make titanium inserts for wave pallets. These inserts (inserted into your delmat or CDM material) will act as your pockets to mask
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang, Fuhai Street,Fuyong
Shenzhen, 30 China
Phone: 13713862102