Electronics Forum | Tue Sep 23 14:29:34 EDT 2008 | realchunks
I have shlves with rollers and a stop on one end. Boxes go in one end and roll towards the other. One end for people to pull from, the other is to load. I have bunch left over and willing to sell cheap. Let me know if you want them.
Electronics Forum | Mon Mar 26 09:41:03 EDT 2018 | fuji_user_2014
Hi Gurus, Looking for alternatives to line makeup after reflow oven. Currently, I have a continuous on flat belt conveying out of my reflow oven straight to an EOL bench. The operator manually picks up the board off the belt (there is a roller at t
Electronics Forum | Mon Mar 26 16:58:53 EDT 2018 | solderingpro
Is there anything stopping you from replacing the flat belt solution to a continuous running steel roller chain conveyor? - From there (depending upon board temperature) you should be able to buffer your boards in a vertical buffer station if neede
Electronics Forum | Fri Sep 23 08:16:57 EDT 2005 | gregp
Base, You are absolutely correct. This is what I intend to do. In fact, our feeders at one time had reel hangers that would allow for reel removal and thus splicing. Sometimes it is frustrating when people are set in their ways and won't consider
Electronics Forum | Fri Sep 23 10:25:40 EDT 2005 | gregp
On our machines, the feeder release latch is designed such that the feeder goes offline (machine will not pick from it) before you can actually remove the feeder. This makes it virtually impossible to damage a nozzle or spindle. I'm not sure about
Electronics Forum | Thu May 01 23:32:46 EDT 2014 | asajedi
I have assembled panels of 24"X9.5" LED Panels (24 strips of 10mm). I need to cut them into strips and join them together then add double sided 3M tape and spool them. How is this best accomplished. Laser Cutting, Die Cutting, Roller Cutting
| 1 |
winsouce.jpg)